Wikus SELEKTA GS M42 saw blade
- metals with tensile strength up to 1000 N/mm²
- small and large solid materials
- band widths from 27x0.9 - 80x1.6 mm
Shipping is not included in the price.
For all orders over €200, we will give you free shipping! 
27.10.2026
Short product description
- metals with tensile strength up to 1000 N/mm²
- small and large solid materials
- band widths from 27x0.9 - 80x1.6 mm
Product description
SELEKTA® GS M42 - High-quality product with premium superfine finish
The super fine finish of the band saw blade and sharp cutting edges increase the cutting area and improve the quality of the cut. The fine blade surface protects the machine blade guides and increases lasting strength.
Purpose of Use
- Metals with tensile strength up to 1000 N/mm2
- Small and large solid materials
- Hardening steels, spring steels, and ball bearing steels
- Rust and acid-resistant steels (ferritic)
- Nitriding, high-speed, and tool steels
- Structural steels, deep drawing steels, and free-cutting steels
- Carbon and heat-treatable steels
- Cast iron
- Aluminum/ Si-alloys
- Non-ferrous metals
Advantages
- Minimal post-processing due to optimal surface quality
- Fewer necessary additives due to straight cuts
- Short cutting time due to high cutting efficiency
- Significant cutting cost savings
Features
- Patented tooth strength and surface
- M42 cutting edge with large positive angle
You may also be interested in
-
Wikus PROFLEX M42 band saw
Na zalogiDostava v 3 delovnih dneh.For profiles Band width from 13x0.65 - 67x1.6 mm Tool and structural steels Cast iron Aluminum/aluminum alloys Non-ferrous metals
-
Wikus MARATHON X3000 saw blade band
Na zalogiDostava v 3 delovnih dneh.- For solid bars and profiles - Band width from 27x0.9 - 67x1.6 mm - Steel resistant to rust and acids (ferritic) - Nickel-based alloys - Titanium, titanium alloys
-
Wikus PRIMAR M42 band saw blade
Na zalogiDostava v 3 delovnih dneh.- For solid bars and profiles - Band widths from 6x0.65 - 67x1.6 mm - Very good price-performance ratio
-
Blade for Saw Wikus SELEKTA GS X3000
Na zalogiDostava v 3 delovnih dneh.- Nickel-based alloys - Titanium, titanium alloys - Hardened and tempered steels (over 1000 N/mm² / 32 HRC) - Band widths from 27x0.9 - 80x1.6 mm
-
Blade for saw Wikus SKALAR X3000
Na zalogiDostava v 3 delovnih dneh.High productivity due to exceptional cutting performance Continuous operation in large saws and on large blocks Hardened and tempered steels (over 1000 N/mm² / 32 HRC) Band widths from 27x0.9 - 100x1.6 mm
-
Wikus SKALAR M42 saw blade
Na zalogiDostava v 3 delovnih dneh.- Continuous operation in large sawmills and on large blocks - Band widths from 27x0.9 - 100x1.6 mm
-
Wikus MARATHON M42 Saw Blade
Na zalogiDostava v 3 delovnih dneh.For solid bars band widths from 13x0.65 - 80x1.6 mm Tool and structural steels Cast iron Aluminum/aluminum alloys Non-ferrous metals
Best Seller
-
Wikus MARATHON M42 Saw Blade
Na zalogiDostava v 3 delovnih dneh.For solid bars band widths from 13x0.65 - 80x1.6 mm Tool and structural steels Cast iron Aluminum/aluminum alloys Non-ferrous metals
-
Wikus PROFLEX M42 band saw
Na zalogiDostava v 3 delovnih dneh.For profiles Band width from 13x0.65 - 67x1.6 mm Tool and structural steels Cast iron Aluminum/aluminum alloys Non-ferrous metals
-
Wikus MARATHON X3000 saw blade band
Na zalogiDostava v 3 delovnih dneh.- For solid bars and profiles - Band width from 27x0.9 - 67x1.6 mm - Steel resistant to rust and acids (ferritic) - Nickel-based alloys - Titanium, titanium alloys
-
Wikus PRIMAR M42 band saw blade
Na zalogiDostava v 3 delovnih dneh.- For solid bars and profiles - Band widths from 6x0.65 - 67x1.6 mm - Very good price-performance ratio
-
Blade for Saw Wikus SELEKTA GS X3000
Na zalogiDostava v 3 delovnih dneh.- Nickel-based alloys - Titanium, titanium alloys - Hardened and tempered steels (over 1000 N/mm² / 32 HRC) - Band widths from 27x0.9 - 80x1.6 mm
-
Blade for saw Wikus SKALAR X3000
Na zalogiDostava v 3 delovnih dneh.High productivity due to exceptional cutting performance Continuous operation in large saws and on large blocks Hardened and tempered steels (over 1000 N/mm² / 32 HRC) Band widths from 27x0.9 - 100x1.6 mm
-
Wikus SKALAR M42 saw blade
Na zalogiDostava v 3 delovnih dneh.- Continuous operation in large sawmills and on large blocks - Band widths from 27x0.9 - 100x1.6 mm
