robust ABS casing large LCD display, 3 digits, clear reading on/off button, Hold function, MIN/MAX button measurement depth approx. 20-40 mm battery status display, display backlight can be turned on storage temperature 0°C-50°C, rel. humidity <80% RH included 9 V battery (6LR61)

Measurement range: 0-100 PSI / 0-7 bar / 0-7 kgf/cm2 / 0-700 kPaReading: 0.1 PSI / 0.01 bar / 0.01 Kgf/cm2 / 1 kPaTolerance: 1%for quick and independent tire pressure measurement in passenger vehicles- robust ABS housing- clear and large numbers, number size 9.5 mm- LCD display with backlight- illuminated connection fitting- on/off button, automatic shutdown- units of measurement can be switched- includes 1x 3V battery (CR2032)

Measuring range: 1-99999 1/min Measuring distance: max. 600 mm - optical Storage temperature: -20 to +70 °C Operating temperature: 0 to +50 °C

• high-performance device for professional use• for measuring roughness parameters• Rz, Ra, Rq, Ry, Rt, Rv, R3z, R3y, RzJIS, Rsk, Rku, Rsm, Rmr with USB 2.0 data output• robust polyamide housing resistant to impacts, ergonomic design• OLED display with clear readout and backlighting• extensive information display and graphical representation• diamond stylus tip, 90°, radius 5 µm, contact force 4mN (0.4gf)• standard compliant with ISO, DIN, ANSI, JIS• digital filter RC, PCRC, Gauss, D-T13565, data memory 2 MB + 2 GB• with built-in rechargeable Li-Ion battery, charger 100-240 V / 50/60 Hz• for up to 10 hours of continuous operation, built-in calendar and RTC• On/Off button, auto shutdown, battery status display• adjustable languages: English, German, Chinese• reliable software for electric motor drive• possibility to connect to a PC or printer, includes connection cable, software• measuring range (µm): Ra 0.005-16 / Rq 0.02 - 160• Rq/Rt/Rp/Rv/R3z/R3y/RzJIS/Rsk/Rku/Rsm/Rmr (µm): ±0.6 %• maximum deviation (%): < ±10• repeatability (%): < 6• cutoff wavelength (mm): 0.25 / 0.8 / 2.5• device dimensions (mm): 140 x 55 x 47• includes software, base plate, calibration test plate, standard measuring probe (Art.No.: 657210), with user manual

for quick and accurate temperature measurementwith external temperature probe, type K- robust housing made of ABS plastic, with insulating housing- large 3 1/2-digit LCD display with clear readings, with battery indicator- on/off button, data hold button, measurement in °C and °F, max. display of 1999- 1 input for type K temperature probes, for temperature and relative measurements- response time approximately 2.5 seconds- storage temperature 0°C - +50°C, relative humidity < 80% RH- with 1x 9 V battery (type 6LR61), with operating instructionsMeasurement range: -50 - +1300 °CReading: 1°C (in the range up to 200 °C)Tolerance: range -50 °C ~ 200 °C: +- 0.10% +1.00 °C range 200 °C ~ 1000 °C: +- 0.30% +2.00 °C range 1000 °C ~ 1300 °C: +- 0.50% +2.00 °C

measuring range: -30 to +500 °C Reading: 0.1 °C Tolerance max.: +- 4.0 / +-4% Repeatability +- 1.0°C Measuring optics: 12:1 Dimensions: 170x135x50 mm

measuring range: -50 to +1300 °C Reading: 0.1 °C Tolerance max.: +- 2.0 / +-2% Repeatability +- 1.0°C Measuring optics: 16:1 Dimensions: 170x135x50 mm

Weighing range max.: 0.62 kg Readability: 0.001 g Linearity: ± 0.004 3 g Weighing pan: Ø 140 mm Dimensions: 202x293x266 mm

Measuring range: 6 - 1000 V AC/DC phase display: > 100 V AC protection category: CAT IV 1000 V dimensions: 238x70x30 mm

Measuring range: 0.7 – 300.00 mm / 0.36 – 11.80 inch Reading: 0.01 mm Tolerance: 0.5% + 0.1 Dimensions: 124x67x30 mm

professional, portable measuring device for quick and location-independent measurementcoating thickness measurement with very simple operation- combined system with two probes for iron/steel (Fe) and non-ferrous metals (NFe)- large display with backlight (can be turned on), with memory function- in a robust aluminum housing, with USB data output and Dataview software- Can be used in any position (horizontal, vertical, and overhead)- for measuring non-magnetic coatings on metal surfaces (Fe) and for measuring insulating layers on non-ferrous metals (NFe)- Applications include surface technology, automotive industry, galvanizing and pipeline construction, spray painting, plastic coatings, aluminum industry, mechanical engineering, bridge construction, as well as in testing corrosion of pressure vessels, boilers, oil tanks, chemical devices, and much more.- Robust housing with an anodized aluminum frame, with a membrane keyboard- Multi-functional display with clear readings and switchable backlighting- "low battery level" indicator, automatic probe type detection, switchable alarm function- Measurement principle with magnetic induction (Fe) and eddy current method (NFe), reading unit in µm and mil- Two measurement modes: continuous and single, can be turned off automatically or manually- 3 calibration methods: one-point calibration, two-point calibration, and rough surface calibration- with 5 standard calibration foils and one aluminum and one steel calibration plate- minimum curvature radius for the Fe probe: convex 1.5 mm, concave 9 mm- min. substrate material thickness for Fe probe 0.5 mm, for NFe probe 50 µm- 5 Statistical analyses: Standard deviation, mean value, maximum value, minimum value, number of measurements, storing a total of 500 measured values- Immediate printout of statistical values via the included USB data cable- including 2 interchangeable probes for Fe (F1) and NFe (N1) measurements- Operating temperature 0 °C ~ 40 °C, relative humidity 20 - 90 % RH- including 2x 1.5 V battery (type AAA, product no: 90002), data cable, Dataview software, and user manual, in a case

• professional portable measuring instrument for quick field hardness testing according to Leeb• with external impact device of type "D" (standard)• with USB data output and Dataview software• robust housing with anodized aluminum frame, with foil keyboard• multifunctional display with clear reading,backlight can be turned on• display functions: hardness scale, hardness value, date, time of testing,battery status display, impact direction,average value, type of impact system used• applicable to most metallic materials, measurements are possible horizontally,vertically or overhead• on/off-manually or automatic shutdown,storage capacity for 600 measurements• includes limit value function, automatic alarm functions upon exceedingcertain values• min. workpiece weight 2 kg on a massive non-vibrating base• display of hardness scale in HL, with automatic conversion toHRB, HRC, HV, HB, HS, and tensile strength (UTS)• workpiece radius (concave/convex) Rmin = 30 mm(< 30 mm with support ring, included)• operating temperature -20 °C ~ +60 °C, relative humidity 20 – 90 %RH• max. workpiece hardness (mm): with impact device D/DC/DLD/D+15 = 5 mm with impact device C = 1 mm with impact device G = 10 mm• max. workpiece hardness 960 HLD• max. deviation ±6 HLD• device dimensions: 130 x 70 x 30 mm• includes 2x 1.5 V batteries (type AA, Art.no.: 90003)• includes test block type "D" (2-piece) and impact device type "D",other impact devices available as optional accessories• with a cleaning brush, USB data cable, screwdriver,Dataview Software, factory calibration certificate, and user manual

• professional portable measuring instrument for fast field testing of hardness according to Leeb• with external impact tester type “D” (standard)• with USB data output and Dataview Software• robust housing with anodized aluminum frame, with membrane keyboard• multifunction display with clear reading, background lighting can be switched on• display functions: hardness scale, hardness value, date, testing time, battery status display, impact direction, average value, type of impact system used• applicable to most metal materials, measurements possible horizontally, vertically, or overhead• on/off-manual or auto. shut-off, storage capacity for 600 measurements• incl. limit value function, auto. alarm functions when certain values are exceeded• min. weight of the workpiece 2 kg on a massive non-vibrating base• display of hardness scale in HL, with auto. conversion to HRB, HRC, HV, HB, HS, and tensile strength (UTS)• radius of the workpiece (concave/convex) Rmin = 30 mm (< 30 mm with sub-plate ring, included)• working temperature -20 °C ~ +60 °C, rel. humidity 20 – 90 %RH• max. hardness of workpiece (mm): with impact device D/DC/DLD/D+15 = 5 mm with impact device C = 1 mm with impact device G = 10 mm• max. hardness of workpiece 960 HLD• max. deviation ±6 HLD• device dimensions: 130 x 70 x 30 mm• incl. 2x 1.5 V battery (type AA, Art.No.: 90003)• incl. test block type “D” (2-part) and impact device type “D”, other impact devices available as accessories• with cleaning brush, USB data cable, screwdriver,Dataview Software, factory calibration certificate and user manual• housing made of plastic, non-slip with rubberized jacket• integrated thermal printer for printing all results and the histogram• with rechargeable Li-ion battery and charger 100-240 V/AC