The set includes the following gauges: Vernier caliper (product no. 201000) - 150 x 0.05 mm - rust-protected - hardened Micrometer (product no. 231300) - 0-25 mm x 0.01 mm - with carbide measuring surfaces Hairline ruler (product no. 3102131) - 100 x 70 mm - chromed Steel ruler (product no. 111001) - 150 x 18 x 0.5 mm - made of stainless steel - mm/inch division

The set includes the following gauges: Weld seam gauge (item no. 474401) - stainless steel - fan-shaped - number of templates 12, 3-12 mm Precision gauge for weld joints (item no. 474403) - stainless steel - hardened and finely ground - with a vernier - matte chrome scale - with locking screw Precision gauge for safe joints (item no. 474404) - stainless steel - hardened and finely ground - Reading with reference line in the reading window Pipe welding gauge / edge offset gauge (item no. 474409) - with measuring jaws moving in opposite directions, e.g., for pipe welds up to a wall thickness of 35 mm - Stainless, hardened version - reading 1.0 mm

- made of brass - measurement in heavy magnetic areas or magnetic workpieces - reading in mm/inch, laser engraved - jaws are finely ground and lapped - three-sided measurements - DIN 862 - in a case

GO - GOOD control measuring rings M 3 / M 4 / M 5 / M 6 / M 8 / M 10 / M 12 In accordance with DIN standard Tool steel, hardened and ground

NO GO - REJECTION Gauge Rings M 3 / M 4 / M 5 / M 6 / M 8 / M 10 / M 12 In accordance with DIN standard Tool steel, hardened and ground

Measurement range 10 mmMetal casingWatch diameter fi 60 mm- scale division 0.01 mm- accuracy 0.015 mm- clamp 8 H6- 1 pointer revolution is 1 mm- with tolerance markings- in a plastic case

stainless steel, non-magnetic steel, which cannot be magnetized- for measurements in strong magnetic fields and precise measurement of magnetic parts- with a round depth gauge D 3 mm- suitable for quadruple measurement- Reading 0.01 mm or 0.0005 inch- DIN 862- with 3 V battery (type CR2032)- Delivered in plastic caseMeasuring range: 150 mmPrecision: 0.03 mmJaw depth: 40 mm

digital angle gaugeresistant to water and emulsions IP 65 according to DIN 40050/IEC 60529ideal for precise leveling and measuring of flatness, perpendicularity,…robust housing with an aluminum V base on the upper and lower sidelarge LCD display, digit size 9 mmwith sound signal and backlightingautomatic screen switch when rotated by 180°with HOLD function, easy calibration, ABS systembuttons for on/off, zeroing at any positionincludes 2×1.5 V battery (AAA)Measuring range: 4 x 90° (0-360°)Reading: 0.05°Measuring accuracy +- 0.15°Dimensions: 150x33x60 mmMagnetic base

Measuring range 150 mm Reading 0.01 mm / 0.0005" Tolerance 0.03 mm Jaw depth 40 mm

Measuring range: 150 mm / 6"Reading: 0.01 mm / 0.0005"Repeatability: 0.01 mmTolerance: 0.02 mmJaw depth: 40 mmInternal jaws: 16.5 mmDepth gauge: flat• professional standard caliper• tight against water spray and emulsion DIN 40050 / IEC 60529• mechanics in stainless hardened design• large LCD display with clear reading, character size 13 mm• measuring jaws finely ground and lapped• On/Off button with locking screw, with adjustable roller• measurement units in mm or inches, zeroing in any position• incl. 2x 3 V battery (CR2032)

Measuring range: 200 mm / 6"Reading: 0.01 mm / 0.0005"Deviation: 0.03 mmBridge width: 100 mmSize of the measuring surface: 5.5 mmElectronic digital depth gauge • IP54, DIN 862• standard model for industry and craft• with glass measuring rod for greater precision• water splash resistant IP54 - DIN 40050 / IEC 60529• stainless hardened mechanics• large LCD display with clear reading, digit size 9 mm• stainless hardened design, fixing screw• push button for On/Off• measuring units switchable mm / inches• zeroing at any position• incl. 1x 3 V battery (CR2032)

robust ABS casing large LCD display, 3 digits, clear reading on/off button, Hold function, MIN/MAX button measurement depth approx. 20-40 mm battery status display, display backlight can be turned on storage temperature 0°C-50°C, rel. humidity <80% RH included 9 V battery (6LR61)

Measuring range: 0 - 20 mm / 0 - 0.8 inch Reading: 0.01 mm / 0.0005 inch Deviation: 0.03 mm Possible angles: 60 / 70 / 80 / 90 ° Dimensions: 100 x 62 x 14 mm

Measurement range: 0-100 PSI / 0-7 bar / 0-7 kgf/cm2 / 0-700 kPaReading: 0.1 PSI / 0.01 bar / 0.01 Kgf/cm2 / 1 kPaTolerance: 1%for quick and independent tire pressure measurement in passenger vehicles- robust ABS housing- clear and large numbers, number size 9.5 mm- LCD display with backlight- illuminated connection fitting- on/off button, automatic shutdown- units of measurement can be switched- includes 1x 3V battery (CR2032)

Length: 175 mm Diameter: 14 mm

Length: 150 mm Diameter: 9 mm