SW600 angle cutting - cutting line
SW600 angle cutting - cutting line
SW600 angle cutting - cutting line
SW600 angle cutting - cutting line
SW600 angle cutting - cutting line
SW600 angle cutting - cutting line
SW600 angle cutting - cutting line
SW600 angle cutting - cutting line

SW600 angle cutting - cutting line

SKU: SW600

- Automatic cutting line
- for angled cuts from 22.5° to 157.5°
- for aluminum and PVC profiles

In stock
Delivery in 3 working days.

Shipping is not included in the price.

For all orders over €200, we will give you free shipping!
Estimated delivery:
19.08.2026

Short product description

- Automatic cutting line
- for angled cuts from 22.5° to 157.5°
- for aluminum and PVC profiles

Product description

Automatic cutting line for bevel cuts from 22.5° to 157.5° for aluminum or plastic profiles.

  • Machine operation via personal computer and 21-inch display
  • Standard processing of profiles from 1000 to 7000 mm in length (longer profile dimensions available upon request)
  • The shortest profile cut length (for 90° cuts) is 90 mm, shorter profiles are available upon request
  • The minimum inner dimension for bevel cuts is 160 mm (45° bevel cut) or 390 mm (22.5° bevel cut)
  • Maximum cut profile size 4000 mm (longer upon request)
  • Stepless saw angle adjustment from 22.5° to 157.5° through control unit
  • Dimensions of the profile being processed: Maximum height 350 mm, maximum width 200 mm, see cutting diagram

Entry side of the cutting line

  • The cutting line for bevel cuts features a horizontal magazine with six transport lines,
  • Maximum load weight on the profile bar: 75 kg
  • Material is fed with a pusher at a maximum feed speed of 180 m/min and positioning accuracy of +/- 0.15 mm over a feed distance of 1000 mm.
  • The gripping clamps can automatically position in Y and Z directions, depending on the profile
  • Pneumatic lifting cylinders slightly lift the profile when inserted into the sawing system, preventing it from tearing over the table plate of the sawing unit
  • Sawing station with Ø 600 mm saw blade and 5.5 kW sawing motor (upgradeable to 9.2 kW as an option)
  • Stepless angle change from 22.5 to 157.5° using servomotor
  • Saw blade feed via electric servo axis and ball screw
  • Oil spray device in cycle with controlled 2-liter reservoir and spray nozzle
  • Fully enclosed saw unit in a closed cabin with internal lighting of the saw
  • 2 suction nozzles, each with a diameter of 100 mm

 

Exit side of the cutting line

  • Exit feeder with automatic separation of cut pieces and remnants. Cut-offs and remnants are pneumatically conveyed back from the machine. (fall height 1000 mm)
  • Good parts are then pulled on a 4 m long roller conveyor using a motorized gripper and then pushed onto an exit table with round belt conveyors using a cross pusher.
  • For small parts, the exit table has a felt strip on the first 250 mm of its length.
  • A blower bar with three nozzles blows off good parts to largely remove aluminum chips, especially from hollow chamber profiles (complete chip absence is not guaranteed).
  • The exit table of the sawing system for bevel cuts can hold good parts up to a length of 4000 mm and has a transport length of 2000 mm on the operator’s side.
  • Good parts are conveyed forward to the operator, who then manually removes them.

You may also be interested in

Best Seller