The Imet GBS 300 Plus GH band saw enables angle cutting* Easily adjustable dual-sided saw bow swivel 45°-0-60° with reading on a large scale* Quick-release vise for fast work on series cuts* Cooling system* Infinitely variable feed speed adjustment using a hydraulic cylinder* Saw blade guidance with HM guidesCutting capacity:90°: ø 255 mm, rectangular 300×180 mm, square 230 mm45°R: ø 210 mm, rectangular 200×180 mm, square 190 mm60°R: ø 135 mm, rectangular 130×100 mm, square 110 mm45°L: ø 180 mm, rectangular 180×100 mm, square 160 mmSaw blade: 27×0.9×2765 mmCutting speed: 35 / 70 m/minWorking height: 940 mmElectrical connection: 400 V / 50 HzElectric motor: 1.5 / 1.8 kWMachine weight: 412 kgDimensions: 1230x1700x1750 mm

The bandsaw BS 350 GH is a very versatile and reliable machine with autonomous descent for cutting small and medium batches, suitable for both locksmithing and machinery construction, with angle cuts from 45° right to 60° left.The swiveling work table with a diameter of 460 mm rotates along with the saw bow to prevent table cuts.The saw frame is made of steel with a closed tubular cross-section, with 300 mm running wheels and adjustable guides for quick blade changes. The machine allows cutting with the blade tilted towards the work surface, reducing blade stress and increasing performance.Machine operation is managed with an adjustable electric control panel, control LEDs, and a load display using the motor ammeter.Blade cleaning. To ensure maximum efficiency of the blade, the BS350GH is equipped with a motorized brush for blade cleaning.The Imet BS 350 Plus GH bandsaw allows angle cutting* Easily adjustable dual-sided swivel of the saw bow 45°-0-60° with large scale reading* Quick-release vise for fast work in serial cuts* Cooling system* Stepless feed rate adjustment via hydraulic cylinder* Saw band guiding with HM guidesCutting capacity:90°: Ø 305 mm, rectangular 350×200 mm, square 260 mm45°R: Ø 250 mm, rectangular 230×200 mm, square 230 mm45°L: Ø 250 mm, rectangular 230×200 mm, square 230 mm60°R: Ø 175 mm, rectangular 170×100 mm, square 155 mm90° solid (C45): Ø 200 mmSaw band: 27×0.9×3370 mmCutting speed: 37 / 74 m/minWorking height: 940 mmElectrical connection: 400 V / 50 HzElectromotor: 1.5 / 1.8 kWMachine weight: 606 kgDimensions: 1480x1700x1900 mm

VELOX 350 is a circular saw for cutting profiles and solid materials made of anodized aluminum and light alloys with maximum precision and finish cutting.IMET manual circular saw for cutting aluminum, VELOX 350 can cut:- from 45° right to 45° left- and tilted up to 45° relative to the vertical axis.- the rotation of the head with the table has a lock at angles 0°, 15°, 15°, 30°, and 45° right and left.Cutting capacity with 350 mm blade- 0°: round: 120 mm - square: 105 mm - rectangular: 200×80 mm- 45° left: round: 115 mm - square: 100 mm - rectangular: 150×80 mm- 45° right: round: 115 mm - square: 100 mm - rectangular: 150×80 mm- 45° tilted: round: 65 mm - square: 60 mm - rectangular: 180×50 mmCutting capacity with 400 mm blade- 0°: round 135 mm - square: 120 mm - rectangular: 200×110 mm- 45° left: round: 130 mm - square: 115 mm - rectangular: 150×110 mm- 45° right: round: 125 mm - square: 110 mm - rectangular: 150×100 mmSaw blade diameter: 350 mmBlade speed: 1800 and 3600 rpmMotor: 1.5/1.8 kWElectrical connection: 400 V, 50 HzDimensions (without stand) 610x880x990 mmWeight 163 kgThe saw is equipped with two front quick clamps for clamping workpieces.A lubrication system with emulsion is standard.The saw blade, base, and roller tracks are additional equipment.

The set includes the following positions:1 piece of pipe reel INDUSTRIE Inox bracket, 4432/32 for water 130°C, 18 meters of hose 3/8', 200 bar, ABS-reel drum.1 piece HD-connecting hose DN10, 3 meters ZN 3/8' X NN 22X1.5 (for Kränzle, Kärcher)1 piece intermediate adapter for hand gun NN 22X1.5 / ZN 3/8' (for Kränzle, Kärcher)ADVANTAGESFor water (max. 130°C)Drum / holder: ABS plastic / stainless steel AISI 304Rotary joint: Stainless steel AISI 304Hose material: Black rubber hose, galvanized steel fittingsSeal: VitonMax. working pressure: 200 barHose dimension: 3/8' (9.5 x 17 mm)Inlet connection: IG 3/8'Outlet connection: IG 3/8'Usage:- workshops (cars, trucks), agriculture- operation of pneumatic tools- assembly- high-pressure cleaningWith a swivel holder 40° right/left and a 60 cm standard hoseTECHNICAL DATAHose diameter 3/8 inchesHose inner x outer 9.5 x 17 mmHose length 18 mMax. Max. working pressure 200 barConnection inlet IG 3/8'Connection outlet IG 3/8'

Possible applications in- welding technology- gas filling stationsStandard:- Swivel bracket 40° left/right- Supply hose 150 cm- Drum and bracket made of lacquered steelTechnical data for model INDUSTRIE 430/81 for gases LPG/methane/natural gas/propaneHose diameter 8×15 mmHose material: rubber hose NBR / PVC (EN 559)Hose length 15 m - other lengths on requestMax. working pressure 20 barSeal: VitonConnection input NN 3/8"Connection output NN 3/8" left

measuring range: -30 to +500 °C Reading: 0.1 °C Tolerance max.: +- 4.0 / +-4% Repeatability +- 1.0°C Measuring optics: 12:1 Dimensions: 170x135x50 mm

measuring range: -50 to +1300 °C Reading: 0.1 °C Tolerance max.: +- 2.0 / +-2% Repeatability +- 1.0°C Measuring optics: 16:1 Dimensions: 170x135x50 mm

Weighing range max.: 0.62 kg Readability: 0.001 g Linearity: ± 0.004 3 g Weighing pan: Ø 140 mm Dimensions: 202x293x266 mm

For solid bars band widths from 13x0.65 - 80x1.6 mm Tool and structural steels Cast iron Aluminum/aluminum alloys Non-ferrous metals

- metals with tensile strength up to 1000 N/mm² - small and large solid materials - band widths from 27x0.9 - 80x1.6 mm

- Nickel-based alloys - Titanium, titanium alloys - Hardened and tempered steels (over 1000 N/mm² / 32 HRC) - Band widths from 27x0.9 - 80x1.6 mm

- Continuous operation in large sawmills and on large blocks - Band widths from 27x0.9 - 100x1.6 mm

High productivity due to exceptional cutting performance Continuous operation in large saws and on large blocks Hardened and tempered steels (over 1000 N/mm² / 32 HRC) Band widths from 27x0.9 - 100x1.6 mm

The manually adjustable measuring stop (weight) MA allows for basic efficient material measurement.With an analog scale on the massive rail, adjustable stop, and stable material fastening, it is a reliable tool in small and medium-sized operations.For installation on roller conveyors Mroller conveyor not included in price

TECHNICAL DATAAngle options: 45/135, 60/120, 75/105, 90°On/Off: YesHolding force: 67 kgWelding current: 300 ALength: 89 mmWidth: 44 mmHeight: 95 mmWeight: 0.36 kgADVANTAGES- 45°/135°, 60°/120°, 75°/105°, 90°- Optimal fit for smooth and round materials- Positioning directly next to the weld seam without losing time- Unique angle selection options with just one magnetic welding angle- Stepless angle selectionMagnetic clamps, angle brackets, positioning aids- Toggle switch ON/OFF- Increased productivity- Cost reduction- Greater safety- Easy installation, positioning, and handling- Annoying metal fragments do not stick- Easy positioning due to ON/OFF switch- Robust and strong magnetic holding force

KATV 100 Blue-Mag crown drilling machine with HEAVY-DUTY guide system and MAG-TEC sensorDrilling capacity:Core drills up to: Ø 100 mm and depth up to 220 mmTwist drills: Ø 3 mm to Ø 32 mmCountersinking: Ø 10 - 55 mmThread cutting: 6 - 32 mmHolder: Morse taper MK3 and Weldon holder 19 mm (other holders on offer)Lubrication with emulsion: Built-in, internal coolingWeight: 22.7 kgMotor power: 1,800 WRevolutions: 60 - 470 rpmTravel: 255 mmPower supply: 230 V /50 HzMagnetic holding force: 2050 kgMagnetic base: 85 × 180 mmThanks to the HEAVY-DUTY guide rail system, a drilling depth of 220 mm can be easily achieved.The machine is equipped as standard with a 55 mm depth clamp.If you require a drilling depth up to 110 mm, we can offer very long holders or two-part ejector pins for core drills.SPECIAL ADVANTAGES:New HEAVY-DUTY system - advantages compared to machines with conventional dovetail guide.Up to 10 times greater stabilityExtremely small guide tolerances due to round guidesThe guide block does not have direct contact with the machine housing, but is exclusively guided by a high precision and stable round rail system. This results in less friction and wear Lower maintenance costs and greater reliabilityThis brings you:Longer drill bit lifespanLess drill bit breakageMore accurate drilling tolerancesBetter surface finish of drilled holesDrilling depth of up to 110 mm is possible even with small drilling machines.NEW MAG-TEC SENSOR:The sensor detects how well the magnet holds the machine on the surface.- directly connected to the motor.- if the sensor shows "RED", the surface is contaminated (rust, paint remnants, debris), the material is less than 6 mm thick, or the feed speed during drilling is too high. Therefore, the machine is not stable. The motor will not start or it will shut down.- if the sensor shows "GREEN", the magnetic holding force is optimal and the machine is safe to use.