Year of manufacture: 1009 ESAB Machine type: CNC plasma and oxy-fuel cutter Vision 55 Control   ESAB cutting machine model Suprarex SXE-P2 5500 in a gantry design with an oxy-fuel torch and a plasma torch. The cutting surface with an extraction table is 3000 mm x 10,000 mm plus an additional surface as an overhang for possible profile processing. The ESAB cutting machine is sold together with CNC control, including the operating software with a movable control panel, extraction table, rails, and Kjellberg HiFocus 280i plasma cutting unit. Appropriate filtration unit can be purchased separately. The ESAB Suprarex cutting machine is in very good condition.     Cutting width: 3000 mm Number of torches: 2 Cutting length: 10000 mm

  Manufacturer: Kaltenbach Year of manufacture: 2003 Machine type: CNC robotic cutting Kuka+Kaltenbach   Kaltenbach KC-1200 flame cutting robot / notching robot is suitable for economical notching of profiles and square tubes. The Kaltenbach KC notching robot is suitable for quick notching of steel beams, H profiles, U profiles, angle profiles, and square tubes. Notching with a CNC-controlled automatic flame cutting system was a beneficial revolution for series production by reducing previously manual notching processing with a hand-held cutting torch. The KC notching robot is in very good condition and can be shown on short notice. The notching system includes a transport system consisting of a roller conveyor system and a measuring pusher clamp system for precise positioning of steel profiles.   The notching robot is equipped with an oxy-acetylene unit for acetylene gas.   The Kaltenbach KC notching robot system consists of a stable machine portal with a Kuka robot mounted on a cross beam. The tested Kuka robot with its moving axes ensures that all release positions can be reached. Seven moving axes ensure precise positioning of profile beams, angle steel, or square tubes. The compact Kuka robot covers six moving axes. The axis mounted on the cross shaft ensures the robot's positioning in the transverse axis. Workpieces move in the X-axis (longitudinal axis) with a solid, sliding measuring cart, which is guided along the rack on the pushing side on the roller conveyor. In this way, even heavy profile beams can be moved and economically notched in connection with a driven roller conveyor. The hydraulic clamping system secures the workpieces during the thermal cutting process. Programming the Kaltenbach KC robot requires good operator skills. CAD data provided by the client or project department is transferred to the system's CUT Manager in DSTV format via the DSTV interface. This can be done via an online connection or through a data medium. This results in a 3D representation of the components. The "Moses" software then generates the necessary robotic data from the DSTV data. The "Moses" software by AUTOCAM Informationstechnik GmbH is an automatic CAD and CAM link to the Kaltenbach KC robot controller for notching in plasma and oxygen cutting processes. Then, with new workpieces, collision checking and robot axis positioning are first verified. This is followed by cutting and finally the removal of finished products with a roller conveyor on the exit side.   Our Nenok service will gladly assist you with the dismantling and assembly of this system.   Number of torches: 1 Workpiece length: 20000 mm Maximum work area (W x H): 1200 x 450 mm Working height: 640 mm Number of axes: 8 Internal work area: 1000 mm Machine weight approx.: 3500 kg Machine dimensions (length x width x height): 2850 x 4400 x 3300 mm  

Year of manufacture: 199_ Machine type: blasting system Control system: Natus Description for Gietart GW 1500-410 Gietart GW 1500-410 continuous blasting machine Universal for deburring and cleaning steel profiles or steel plates, with 4-jet turbines type C 350 each 7.5 kW, including brush and suction device, including inlet roller conveyor and outlet roller conveyor   Brushing and finishing device: 1 piece Passage width: 1500 mm Passage height: 500 mm Number of turbines: 4 pcs. Power supply: 3 x 400 V Turbine power: 7.5 kW each

Year of manufacture: 1992 Machine type: CNC Control Siemens Sinumerik 3G Description for Peddinghaus LC 1250 - TDK 1000/9E Peddinghaus LC 1250-TDK 1000/9 Drilling system for steel structures, steel trading, and plant construction. Circular saw Peddimat is equipped with segment saw blades and a saw blade diameter of 1250 mm for profile processing. The saw allows for miter rotation +45°/-45°. The profile drilling system has 9 drilling spindles (3 spindles per axis) and is suitable for profiles up to max. 1000 mm. Internally cooled drills for coolant channels Nenok HSS, designed for high-performance drilling, are used for drilling. The drilling saw system is equipped with the marking unit Signomat 05. Optional roller tables and cross carriers are available. The Peddinghaus drilling and sawing system can still be viewed in production. We are pleased to offer you a comprehensive service for dismantling, servicing, assembly, and training. Spare parts supply for this system is fully available.   Connection voltage: 380 V Number of drilling spindles: 9 pcs. Profile width: 1000 mm Profile height max.: 420 (drilling) mm Maximum profile height: 440 (sawing) mm Saw blade dimensions: 1250 mm Control voltage: 24V Operating voltage: 380V

Opis za Kaltenbach KBS 620 DG Kaltenbach KBS 620 DG tračna žaga za jeklene konstrukcije, polavtomatska, z nastavkom hitrosti rezanja in hidravličnim pomikom traku žage je brezstopenjsko nastavljiva. Vključno z dovodnim valjčnim transporterjem in izpustnim valjčnim transporterjem ter motoriziranim dolžinskim omejevalnikom L 120 NC z NC krmiljenjem, Teža stroja cca: 2,6 t Moč motorja: 4,0 kW Potreben prostor pribl.: 3,1 x 1,2 x 2,28 m Dolžina žaginega traku: 6175 x 41 x 1,3 mm Območje rezanja pri 45 stopinjah: kvadrat: 430 - 350 mm Razpon rezanja pri 90 stopinjah: kvadrat: 620 - 350 mm Širina reza: 350 mm Hitrost rezanja: 15 - 90 m / min Premer rezanja: 620 mm Pomik žaginega traku: 0 - 300 mm / min  

Voortman V600 vrtalni sistem za profile in ravno jeklo s premično vrtalno enoto. CNC krmiljena vrtalna enota se lahko premika v vzdolžni smeri, nastavitev 0 - 18.300 mm, z ročno hitro zamenljivo vpenjalno glavo, navpično hidravlično zadrževalno napravo, merjenjem višine traku in prirobnice, z avtomatskim, elektronsko brezstopenjskim krmiljenjem pomika in hitrosti (stalno spremljanje), ki omogoča optimalno obdelavo, prilagajanje s frekvenčno krmiljenim pogonom vretena, rezanje navojev s posebnimi orodji možno proti doplačilu, možna je pritrditev sredinskih lukenj. Robusten okvir brez torzij za držanje in vodenje vrtalne enote, ki je nameščena vodoravno (os Y) na kabini. Uporabljajo se svedri za hladilne kanale Nenok HSS, ki so notranje hlajeni z mešanico zraka in olja. X-os za pozicioniranje vrtalne kabine v vzdolžni smeri (0-18.300 mm) Y-os za vodoravno pozicioniranje vrtalne enote (0-450 mm) Z-os za navpično nastavitev višine vrtalne enote (0-1.000 mm) Velikost profila - max.: 400 x 1000 mm Število vrtalnih vreten: 1 kos. Premer vrtanja: 8 - 40 mm Rezanje navojev: M8-M24 Hitrost vrtalnega vretena: 200 - 1200 vrt / min Ploščato jeklo: največ 80 x 1000 mm Delovna višina: 920 +/- 25 mm Vrtalna miza: 2000 x 300 x 920 (+/- 25) mm  

Used lathe with Siemens 828D and Shopturn, C-axis, and extensive additional equipment.Only 213 spindle hours (since summer 2021)! Additional information about the machine, standard and special equipment on request. Guests also have access to our favorable conditionsfor rental and purchase. Turning diameter600 mm Turning length1380 mm Spindle noseA2-8 ASA Spindle bore91 mm Spindle speeds50-3000 rpm Rapid traverse - longitudinal / flat20/16 m/min Tool turret12 times Tool holder25x25 / ø40 (drill bar holder) mm Rear end quill diameter85 mm Rear end quill adjustment120 mm Quill holder for rear end MK4 MK Spindle motor15 / 18.5 kW Servo motor on X-axis3 kw Servo motor on Z axis3 kw Machine weight approx.7 CNC controlSiemens 828D (Shopturn) C-axis Chip conveyor(chain version) with mobile chip cart Complete enclosure Foot switch for hydraulic clamping heads / rear part Tool measurement fixed framesmanually movable fixed frame Ø 20 ~ 200 mm 3-color signal light Tool holderExternal tool holder for lathe, 2 pieces / 2 pieces axial tool holders for driven tools / 2 pieces radial tool holders for driven tools Drill rod holder2 pieces Tool turret2-way disk turret brand Baruffaldi type TBMA200 Hydraulic unitHydraulic unit with motor, pump and hydraulic clamping cylinder hydraulic 3-jaw chuck3 jaws hyd. Chuck Ø 250 mm and set of hard and soft jaws, made by Strong CE version Work area lighting Central lubrication Leveling elements Coolant device  

Year of manufacture: 1999 Type of machine: Semi-automatic The machine is in good condition   Vernet Behringer VP 124 Angle Processing Press For automatic punching, cutting, marking of angles 12 m long feed line on the input and output side Automatic angle loader on the input side   Working area 12,000 mm Size min. 35 x 35 x 4 mm Size max. 150 x 150 x 15 mm Pressing force 490 kN Cutting force max. 1600 kN

Year of manufacture: 2006 Machine type: CNC The machine is in good condition   Portal type plasma and oxy-fuel cutter Compact and stable design Equipped with 2 oxy-fuel cutters and 1 plasma cutter (Kjellberg Hi Focus 130) The software is easy to use Control type MSNC Cutting width is 2000 mm Working area is 2000 x 6000 mm

Year of manufacture: 1992 Machine type: CNC The machine is in good condition   Peddinghaus FDB 600 Plate Processing System Drilling and oxy-fuel cutting Wide range of workpiece sizes Material width from 80 mm to 600 mm Thickness from 6 mm to 50 mm Length up to 6000 mm Drilling system with 3 drill heads Designed for HSS drills With drilling capacity from Ø 8 mm to Ø 40 mm Choice of drill head depends on the desired hole diameter Each drill head operates at different speeds Acetylene is used for oxy-fuel cutting It is possible to change the type of gas On the input side, the machine is equipped with a slanted feeding system with 2x 3000 mm length Siemens CNC control ensures the machine's operation Programming is possible on the machine as well as from the office Loading CAD files in DSTV or DXF format     Number of drill heads 3 pcs Drilling capacity Ø 40 mm Cutting system Oxy-fuel cutting Min. workpiece size 80 x 6 mm Max. workpiece size 600 x 50 x 6000 mm Power 30 kW Weight 6500 kg Dimensions 2000 x 1900 x 2800 mm

Year of manufacture: 2003 Machine type: CNC The machine is in good condition   Kaltenbach KKS400 NA automatic circular saw Universal and compact circular saw with automatic material feeding Circular blade moves from bottom to top Diameter of the circular blade is 400 mm Suitable for cutting flat plates, angles, solid materials, as well as profiles Rotating table for angled cutting The table rotates 180° Angle display on the scale Quickly adjustable angles at 90° and 45° in both directions Stepless hydraulic adjustment of blade feed Adjustable even during cutting Possibility to input 20 programs each up to 10 commands Possible use of circular blades with a thickness from 2.2 to 5 mm Possible use of all possible HSS blades   Cutting capacity: Flat plate 305 x 40 mm Cutting capacity: Angle 120 x 120 mm Cutting capacity: Round Ø 130 mm Diameter of the circular blade 400 mm Cut thickness 2.2 - 5 mm Feed speed 0 - 1000 mm/min Angled cutting +/- 90° Circular blade hole 50 mm Motor power 1.7 / 2.6 kW Weight 1700 kg Dimensions 2650 x 1290 mm

Year of manufacture: 2014 Machine type: CNC The machine is in good condition   Ficep ORIENT 601 DDB drilling system Ficep K 100 Band saw Feeding system on the input side that also measures the workpiece On both input and output sides, there is a 12 m long roller conveyor Drilling head with rotating spindle and tool changer capable of using up to 6 tools Designed for use with HM drills The cone in the spindle is HSK A80 Programming possible from the office or directly on the machine Transfer of CAD files in DSTV or DXF format   Straight 0 ° 310 x 1015 mm Right 45 ° 310 x 610 mm Left 45 ° 310 x 610 mm Saw blade 41 x 1.3 x 7880 mm     Drilling capacity 40 mm No. of drilling heads 1 piece Motor power 17 kW Drilling speed 180 - 5000 rpm Control system Ficep Mitrol  

Year of manufacture: 1994 Machine type: CNC The machine is well preserved   Machine for Autogenous Cutting Messer Griesheim Cortina M 4000 3 MG 200 Alfa torches The extraction table and filtering device are integrated Omnicom CNC controller Working width: 4000 mm

Voortman Plasma Cutter V304 (capable of processing plates up to 3,000 mm x 6,000 mm) Gantry beam 5,000 mm and side carrier X-guide (9,000 mm on both sides of the machine, including double linear guides, screw gear system, and rubber belt) Cutting and depositing table 3,800 mm x 6,240 mm Position 1: Kjellberg SmartFocus400 Plasma Cutting Unit (1 piece, automatic gas console, along with a database of cutting parameters) 3D Plasma Unit (1 piece, including 5 NC axes, Voortman height control, intelligent torch positioning system, and 3D collision sensor for x, y, k, and v weld preparations) Clamping position (1 piece, clamped in position 2, with manual clamping) Silencer (1 piece, including a 1.2L reservoir) Position 2: Autogenous Cutting Torch (1 piece, automatic gas console, ignition, and piercing, along with a database of cutting parameters) Voortman Height Control (1 piece, capacitive height control) Position Compensation (1 piece, servo motor, including laser sensor) Donaldson Smoke Extraction Unit DFPRO12 - 200L - (NEW) Hardware and Software (includes VACAM 'Machine Edition', VACAM 'Office Edition', VACAD editor module, VANEST scheduling software) SigmaNEST PowerPack Automatic Nesting Software Protective Devices (safety bumpers, emergency stop cable) Year 2015 V304 Floor Plan

  Manufacturer: Kaltenbach Year of manufacture: 2003 Machine type: CNC robotic cutting Kuka+Kaltenbach   Kaltenbach KC-1200 flame cutting robot / notching robot is suitable for economical notching of profiles and square tubes. The Kaltenbach KC notching robot is suitable for quick notching of steel beams, H profiles, U profiles, angle profiles, and square tubes. Notching with a CNC-controlled automatic flame cutting system was a beneficial revolution for series production by reducing previously manual notching processing with a hand-held cutting torch. The KC notching robot is in very good condition and can be shown on short notice. The notching system includes a transport system consisting of a roller conveyor system and a measuring pusher clamp system for precise positioning of steel profiles.   The notching robot is equipped with an oxy-acetylene unit for acetylene gas.   The Kaltenbach KC notching robot system consists of a stable machine portal with a Kuka robot mounted on a cross beam. The tested Kuka robot with its moving axes ensures that all release positions can be reached. Seven moving axes ensure precise positioning of profile beams, angle steel, or square tubes. The compact Kuka robot covers six moving axes. The axis mounted on the cross shaft ensures the robot's positioning in the transverse axis. Workpieces move in the X-axis (longitudinal axis) with a solid, sliding measuring cart, which is guided along the rack on the pushing side on the roller conveyor. In this way, even heavy profile beams can be moved and economically notched in connection with a driven roller conveyor. The hydraulic clamping system secures the workpieces during the thermal cutting process. Programming the Kaltenbach KC robot requires good operator skills. CAD data provided by the client or project department is transferred to the system's CUT Manager in DSTV format via the DSTV interface. This can be done via an online connection or through a data medium. This results in a 3D representation of the components. The "Moses" software then generates the necessary robotic data from the DSTV data. The "Moses" software by AUTOCAM Informationstechnik GmbH is an automatic CAD and CAM link to the Kaltenbach KC robot controller for notching in plasma and oxygen cutting processes. Then, with new workpieces, collision checking and robot axis positioning are first verified. This is followed by cutting and finally the removal of finished products with a roller conveyor on the exit side.   Our Nenok service will gladly assist you with the dismantling and assembly of this system.   Number of torches: 1 Workpiece length: 20000 mm Maximum work area (W x H): 1200 x 450 mm Working height: 640 mm Number of axes: 8 Internal work area: 1000 mm Machine weight approx.: 3500 kg Machine dimensions (length x width x height): 2850 x 4400 x 3300 mm  

Year of manufacture: 2003 Machine type: CNC The machine is in good condition   Kaltenbach KC-1200 Autogenous cutting with the help of a robot. For processing profiles and square tubes. Input feed system consisting of a precision feeder and measuring system. Autogenous cutting with Acetylene. The robot has 7 axes, 6 robotic and 1 gantry for moving the entire robot. Transferring CAD files in DSTV format.   Number of burners 1 piece Length of the workpieces 2000 mm Work surface (W x H) 1200 x 450 mm Number of axes 7 Dimensions 2850 x 4400 x 3300 mm Weight 3500 kg

Year of manufacture: 2010 Machine type: CNC The machine is in good condition   Drilling system FICEP 1103 DEB. Band saw FICEP SCS 126 for cutting at an angle.   The input feed and measuring system measures the length of profiles and plates. CNC-controlled Band Saw FICEP has an Automatic sorting system which ensures the removal of small pieces.   Straight 0 ° 450 mm 1250 x 450 mm 450 mm Right 45 ° 450 mm 800 x 450 mm 450 mm Left 45 ° 450 mm 800 x 450 mm 450 mm Right 60 ° 450 mm 500 x 450 mm 450 mm Left 60 ° 450 mm 500 x 450 mm 450 mm Saw blade band 67 x 1.6 x 10500 mm Cutting speed 20-100 m/min     The FICEP 1103 DEB drilling system operates in 3 different axes, each equipped with an automatic tool changer. 15 HSK-A63 tool holders are required for the changer. The machine is equipped with HM drills. Integrated chip disposal system. 22 m input conveyor system. 19 m output conveyor system. The machine is equipped with a Mitrol CNC MINOSSE control system. Programming is possible via your computer with the help of MINOSSE software or directly on the machine. Acceptance of CAD files in DSTV or DXF format.     Drilling capacity Ø 40 mm Number of drilling heads 3 pcs Rotational speed 180 - 3000 RPM Feed rate 40 - 800 mm/min Motor power of the drilling system 19 kW Input feeding system 22 m Output feeding system 19 m Max. size of I-profile 1100 x 450 mm Max. size of U-profile 1100 x 300 mm Max size of angles 250 x 250 x 40 mm Max. width of plates 1100 mm  

Year of manufacture: 199_ Machine type: blasting system Control system: Natus Description for Gietart GW 1500-410 Gietart GW 1500-410 continuous blasting machine Universal for deburring and cleaning steel profiles or steel plates, with 4-jet turbines type C 350 each 7.5 kW, including brush and suction device, including inlet roller conveyor and outlet roller conveyor   Brushing and finishing device: 1 piece Passage width: 1500 mm Passage height: 500 mm Number of turbines: 4 pcs. Power supply: 3 x 400 V Turbine power: 7.5 kW each

Year of manufacture: 2014 Machine type: conventional The machine is in good condition   Kaltenbach Sprint 1504 blasting machine For commercial blasting of sheets and profiles The machine is equipped with 4 C380 blasting turbines, each with 11 kW Smaller pieces can be processed in the blasting basket The machine is equipped with a filtering system as well as a brushing and blowing system It has an input and output feeding system   Max. width of the workpiece 1600 mm Max. height of the workpiece 650 mm Number of turbines 4 pcs Turbine power 11 kW Feeding speed 0.8 - 1.5 m/min Height 5293 mm

Year of manufacture: 2008 Type of machine: CNC The machine is in good condition   Combined drilling system V630 and band saw VB1050 Designed for cutting and drilling metal profiles up to a profile size of 1000 mm Equipped with a signing and marking system Includes a 20 m infeed and outfeed system The infeed system is equipped with driven rollers for moving the profile and simultaneous profile measuring Profile clamping force during processing is automatically regulated according to the measured profile size Programming via built-in computer or by transferring programs CAD files: DXF or DSTV, the machine is equipped with Vacon 110 controls The Voortman drilling system V630 is equipped with three drilling heads. Each drilling head has its own tool changer with 5 tools each. The drilling heads are adapted for the use of drilling tools with an internal cooling channel, allowing for mist cooling with oil directly through the tool during drilling. The tool holder clamping is SK 40. The machine is equipped with a system for embossing letters and numbers. The system is equipped with 20 meters of driven roller conveyor for entry and 20 meters of exit roller conveyor. Additionally, the system can be outfitted with transverse loaders, which are not included as standard. VB1050 Straight 0 ° 1130 x 500 mm 500 mm Left/Right 45 ° 925 x 500 mm 500 mm Left/Right 60 ° 725 x 500 mm 500 mm Saw blade 54 x 1.6 x 9550 mm Drive power 7.5 kW, 400 V Cutting speed 40 - 120 m/min (Stepless) Feeding speed 6 m/min     V630 + VB1050 Smallest possible workpiece 10 x 60 mm Largest possible workpiece 1050 x 450 mm Shortest possible workpiece 1200 mm HSS drilling capacity 40 mm HM drilling capacity 32 mm Thread tapping M6 - M30 Number of drilling heads 3 pcs X-axis speed 42 m/min Y-axis speed 35 m/min Z-axis speed 35 m/min Number ofrevolutions 100 - 2500 rpm V630 motor power 30 kW Taper in quill SK40 Load capacity 400 kg/m Number of tools 3 x 5 Clamps 2horizontal Weight V630 7,500 kg Weight VB1050 3,500 kg Embossing marking system 1,000 kg    

Year of manufacture: 1992 Machine type: CNC Control Siemens Sinumerik 3G Description for Peddinghaus LC 1250 - TDK 1000/9E Peddinghaus LC 1250-TDK 1000/9 Drilling system for steel structures, steel trading, and plant construction. Circular saw Peddimat is equipped with segment saw blades and a saw blade diameter of 1250 mm for profile processing. The saw allows for miter rotation +45°/-45°. The profile drilling system has 9 drilling spindles (3 spindles per axis) and is suitable for profiles up to max. 1000 mm. Internally cooled drills for coolant channels Nenok HSS, designed for high-performance drilling, are used for drilling. The drilling saw system is equipped with the marking unit Signomat 05. Optional roller tables and cross carriers are available. The Peddinghaus drilling and sawing system can still be viewed in production. We are pleased to offer you a comprehensive service for dismantling, servicing, assembly, and training. Spare parts supply for this system is fully available.   Connection voltage: 380 V Number of drilling spindles: 9 pcs. Profile width: 1000 mm Profile height max.: 420 (drilling) mm Maximum profile height: 440 (sawing) mm Saw blade dimensions: 1250 mm Control voltage: 24V Operating voltage: 380V

Year of manufacture: 2019 Machine type: CNC The machine is in good condition   Sato Satronik D 4200 is a very reliable, modern CNC machine for oxy-fuel cutting Gantry design The exhaust table is easy to clean Donaldson Torrit Filtration system The table has 6 mechanical exhaust channels Faster slag extraction 4 Nozzles for oxy-fuel cutting Designed for cutting large workpieces up to a max. thickness of 300 mm   Table size 12,600 x 4,200 mm Working width max. 3,700 mm Guide length 16,000 mm Feed rate 10 - 12000 mm/min   CNC controllers optimized for oxy-fuel cutting in conjunction with special software, ensure easy programming of Satronik D

Year of manufacture: 2016 Type of machine: NC The machine is in good condition   Kaltenbach KBS 620 DG semi-automatic band saw for cutting at an angle. For cutting I, T, U, … profiles and all types of pipes. Part of the machine is the Kaltenbach T13 conveyor system with a 14.5 m long input feeding system and a 12 m long output feeding system. On the input side, a parallel transport system (18.5 m) is added for loading material onto the main conveyors. Equally on the output side (12 m), as well as a place for depositing processed workpieces and a place for material removal. Control of the input and output system via the control console. For measuring workpieces, the Kaltenbach LS 270 measuring stop with NC control is used. Max. length with stop 10,000 mm. The pneumatically controlled stop allows for the processing of smaller workpieces. Vertical and horizontal hydraulic clamps secure the workpieces. Laser for cut line display Heating of the control console and electrical cabinet Swivel -70° - 0° - +30°     Straight 0 ° 620 x 350 mm Right 70 ° 600 x 350 mm Left 70 ° 600 x 350 mm Right 45 ° 430 x 350 mm Saw blade band 41 x 1.3 x 6175 mm Drive power 4.0 kW, 400 V Cutting speed 15 - 90 m/min Feed speed 0 - 300 mm/min Size 3100 x 1200 x 2280 mm Weight 2600 kg

Opis za Kaltenbach KBS 620 DG Kaltenbach KBS 620 DG tračna žaga za jeklene konstrukcije, polavtomatska, z nastavkom hitrosti rezanja in hidravličnim pomikom traku žage je brezstopenjsko nastavljiva. Vključno z dovodnim valjčnim transporterjem in izpustnim valjčnim transporterjem ter motoriziranim dolžinskim omejevalnikom L 120 NC z NC krmiljenjem, Teža stroja cca: 2,6 t Moč motorja: 4,0 kW Potreben prostor pribl.: 3,1 x 1,2 x 2,28 m Dolžina žaginega traku: 6175 x 41 x 1,3 mm Območje rezanja pri 45 stopinjah: kvadrat: 430 - 350 mm Razpon rezanja pri 90 stopinjah: kvadrat: 620 - 350 mm Širina reza: 350 mm Hitrost rezanja: 15 - 90 m / min Premer rezanja: 620 mm Pomik žaginega traku: 0 - 300 mm / min