Manufacturer: Kaltenbach Year of manufacture: 2003 Machine type: CNC robotic cutting Kuka+Kaltenbach   Kaltenbach KC-1200 flame cutting robot / notching robot is suitable for economical notching of profiles and square tubes. The Kaltenbach KC notching robot is suitable for quick notching of steel beams, H profiles, U profiles, angle profiles, and square tubes. Notching with a CNC-controlled automatic flame cutting system was a beneficial revolution for series production by reducing previously manual notching processing with a hand-held cutting torch. The KC notching robot is in very good condition and can be shown on short notice. The notching system includes a transport system consisting of a roller conveyor system and a measuring pusher clamp system for precise positioning of steel profiles.   The notching robot is equipped with an oxy-acetylene unit for acetylene gas.   The Kaltenbach KC notching robot system consists of a stable machine portal with a Kuka robot mounted on a cross beam. The tested Kuka robot with its moving axes ensures that all release positions can be reached. Seven moving axes ensure precise positioning of profile beams, angle steel, or square tubes. The compact Kuka robot covers six moving axes. The axis mounted on the cross shaft ensures the robot's positioning in the transverse axis. Workpieces move in the X-axis (longitudinal axis) with a solid, sliding measuring cart, which is guided along the rack on the pushing side on the roller conveyor. In this way, even heavy profile beams can be moved and economically notched in connection with a driven roller conveyor. The hydraulic clamping system secures the workpieces during the thermal cutting process. Programming the Kaltenbach KC robot requires good operator skills. CAD data provided by the client or project department is transferred to the system's CUT Manager in DSTV format via the DSTV interface. This can be done via an online connection or through a data medium. This results in a 3D representation of the components. The "Moses" software then generates the necessary robotic data from the DSTV data. The "Moses" software by AUTOCAM Informationstechnik GmbH is an automatic CAD and CAM link to the Kaltenbach KC robot controller for notching in plasma and oxygen cutting processes. Then, with new workpieces, collision checking and robot axis positioning are first verified. This is followed by cutting and finally the removal of finished products with a roller conveyor on the exit side.   Our Nenok service will gladly assist you with the dismantling and assembly of this system.   Number of torches: 1 Workpiece length: 20000 mm Maximum work area (W x H): 1200 x 450 mm Working height: 640 mm Number of axes: 8 Internal work area: 1000 mm Machine weight approx.: 3500 kg Machine dimensions (length x width x height): 2850 x 4400 x 3300 mm  

Year of manufacture: 199_ Machine type: blasting system Control system: Natus Description for Gietart GW 1500-410 Gietart GW 1500-410 continuous blasting machine Universal for deburring and cleaning steel profiles or steel plates, with 4-jet turbines type C 350 each 7.5 kW, including brush and suction device, including inlet roller conveyor and outlet roller conveyor   Brushing and finishing device: 1 piece Passage width: 1500 mm Passage height: 500 mm Number of turbines: 4 pcs. Power supply: 3 x 400 V Turbine power: 7.5 kW each

Year of manufacture: 1992 Machine type: CNC Control Siemens Sinumerik 3G Description for Peddinghaus LC 1250 - TDK 1000/9E Peddinghaus LC 1250-TDK 1000/9 Drilling system for steel structures, steel trading, and plant construction. Circular saw Peddimat is equipped with segment saw blades and a saw blade diameter of 1250 mm for profile processing. The saw allows for miter rotation +45°/-45°. The profile drilling system has 9 drilling spindles (3 spindles per axis) and is suitable for profiles up to max. 1000 mm. Internally cooled drills for coolant channels Nenok HSS, designed for high-performance drilling, are used for drilling. The drilling saw system is equipped with the marking unit Signomat 05. Optional roller tables and cross carriers are available. The Peddinghaus drilling and sawing system can still be viewed in production. We are pleased to offer you a comprehensive service for dismantling, servicing, assembly, and training. Spare parts supply for this system is fully available.   Connection voltage: 380 V Number of drilling spindles: 9 pcs. Profile width: 1000 mm Profile height max.: 420 (drilling) mm Maximum profile height: 440 (sawing) mm Saw blade dimensions: 1250 mm Control voltage: 24V Operating voltage: 380V

Opis za Kaltenbach KBS 620 DG Kaltenbach KBS 620 DG tračna žaga za jeklene konstrukcije, polavtomatska, z nastavkom hitrosti rezanja in hidravličnim pomikom traku žage je brezstopenjsko nastavljiva. Vključno z dovodnim valjčnim transporterjem in izpustnim valjčnim transporterjem ter motoriziranim dolžinskim omejevalnikom L 120 NC z NC krmiljenjem, Teža stroja cca: 2,6 t Moč motorja: 4,0 kW Potreben prostor pribl.: 3,1 x 1,2 x 2,28 m Dolžina žaginega traku: 6175 x 41 x 1,3 mm Območje rezanja pri 45 stopinjah: kvadrat: 430 - 350 mm Razpon rezanja pri 90 stopinjah: kvadrat: 620 - 350 mm Širina reza: 350 mm Hitrost rezanja: 15 - 90 m / min Premer rezanja: 620 mm Pomik žaginega traku: 0 - 300 mm / min  

Voortman V600 vrtalni sistem za profile in ravno jeklo s premično vrtalno enoto. CNC krmiljena vrtalna enota se lahko premika v vzdolžni smeri, nastavitev 0 - 18.300 mm, z ročno hitro zamenljivo vpenjalno glavo, navpično hidravlično zadrževalno napravo, merjenjem višine traku in prirobnice, z avtomatskim, elektronsko brezstopenjskim krmiljenjem pomika in hitrosti (stalno spremljanje), ki omogoča optimalno obdelavo, prilagajanje s frekvenčno krmiljenim pogonom vretena, rezanje navojev s posebnimi orodji možno proti doplačilu, možna je pritrditev sredinskih lukenj. Robusten okvir brez torzij za držanje in vodenje vrtalne enote, ki je nameščena vodoravno (os Y) na kabini. Uporabljajo se svedri za hladilne kanale Nenok HSS, ki so notranje hlajeni z mešanico zraka in olja. X-os za pozicioniranje vrtalne kabine v vzdolžni smeri (0-18.300 mm) Y-os za vodoravno pozicioniranje vrtalne enote (0-450 mm) Z-os za navpično nastavitev višine vrtalne enote (0-1.000 mm) Velikost profila - max.: 400 x 1000 mm Število vrtalnih vreten: 1 kos. Premer vrtanja: 8 - 40 mm Rezanje navojev: M8-M24 Hitrost vrtalnega vretena: 200 - 1200 vrt / min Ploščato jeklo: največ 80 x 1000 mm Delovna višina: 920 +/- 25 mm Vrtalna miza: 2000 x 300 x 920 (+/- 25) mm  

Year of manufacture: 2004 Machine type: CNC The machine is in good condition Workpiece width: 600 mm Workpiece height: 300 mm Drilling diameter: 10 - 40 mm Number of drilling axes: 3 Saw blade dimensions: 6175 x 41 x 1.3 mm Cutting speed: 15 - 100 m / min   Kaltenbach KBS 620 DG-KD 615 CNC controlled saw and drill combination. This sawing and drilling system consists of a horizontal band saw Kaltenbach KBS 620 DG, drilling system Kaltenbach KD 615, measuring trolley with clamps, and a conveyor system with roller conveyors for material transport. This Kaltenbach sawing and drilling system is ideally suited for economical sawing, drilling, marking, and threading profiles, square tubes, and flat bars in medium-sized steel constructions, steel structures, and steel traders. Kaltenbach KBS 620-KD 615 saw and drilling machine is currently under refurbishment at our factory. Kaltenbach KBS 620 DG-KD 615 machine components   The CNC controlled Kaltenbach saw and drilling system is composed of the following components: Horizontal band saw Kaltenbach KBS 620 DG The Kaltenbach KBS 620 DG horizontal band saw with dual angle cutting capability can be rotated to +60 / -45 degrees. This dual angle cutting system is suitable for sawing steel profiles, square tubes, and flat steel bars. The feeding system positions the workpiece at the exact location under the saw blade, according to the entered length and angle parameters supplied via CNC control. The dimensions of the KBS 620 DG saw blade are 6175 x 41 x 1.3 mm, and you can use various types of saw blades like bimetal M2, bimetal M42, bimetal M51. The cutting speed is infinitely variable in the range of 15 - 100 m/min. Kaltenbach KD 615 drilling system The profile drilling system Kaltenbach KD 615 is equipped with 3 drilling units (one vertical and two horizontal) and a 5-position tool changer for each drilling axis. The maximum workpiece size for the drilling system is 600 x 300 mm, with a minimum size of 50 x 5 mm. The automatic tool changer stores the appropriate drilling tools for drilling with HSS drills with cooling channel in sizes 10 - 40 mm. Highly efficient HSS drills with cooling channels can be sharpened and are mounted with Morse taper adapters. Both drills and saw blades are cooled by air cooling with an oil mist micro-dosing system, increasing efficiency. Kaltenbach KBS 620 DG-KD615 mode of operation After selecting the desired job order, the selected initial material (profiles) is placed on the entry roller conveyor. According to the production order, the profile and processing data are entered into the Kaltenbach CNC control. With the Kaltenbach software, the system can be programmed directly at the machine's control panel or import program files from a CAD system in DSTV format. Once the Kaltenbach sawing and drilling system is programmed with all relevant data, such as material lengths, saw lengths, angle cut settings, drilling positions, drilling diameters, etc., the machine operator must install the appropriate drilling tools into the tool changer. From here, the production process is automated; the worker only needs to remove the first remnant at the alignment cut and then the finished products.   Kaltenbach KBS 620 DG-KD 615 Technical data: Kaltenbach KBS 620 DG horizontal band saw: Cutting area at 45 degrees: flat 430 x 350 mm Cutting area at 60 degrees: square 290 x 350 mm Saw blade dimensions: 6175 x 41 x 1.3 mm Cutting speed 15 - 90 m / min Working feed - 400 mm / min Kaltenbach KD 615 CNC drilling system with 3 drilling axes: Drill spindle speed range 200 - 1000 rpm Drilling spindle drive 3 x 7.5 kW Total drill length. 160-460 mm Drilling feed range 60 - 180 mm / min 5-position tool changer for each drilling axis   Kaltenbach transport system Material transport system consisting of a push measuring trolley for profile lengths up to 12 m. Infeed roller conveyor Outfeed roller conveyor It is possible to shorten or lengthen the roller conveyor for an additional charge.    

Used lathe with Siemens 828D and Shopturn, C-axis, and extensive additional equipment.Only 213 spindle hours (since summer 2021)! Additional information about the machine, standard and special equipment on request. Guests also have access to our favorable conditionsfor rental and purchase. Turning diameter600 mm Turning length1380 mm Spindle noseA2-8 ASA Spindle bore91 mm Spindle speeds50-3000 rpm Rapid traverse - longitudinal / flat20/16 m/min Tool turret12 times Tool holder25x25 / ø40 (drill bar holder) mm Rear end quill diameter85 mm Rear end quill adjustment120 mm Quill holder for rear end MK4 MK Spindle motor15 / 18.5 kW Servo motor on X-axis3 kw Servo motor on Z axis3 kw Machine weight approx.7 CNC controlSiemens 828D (Shopturn) C-axis Chip conveyor(chain version) with mobile chip cart Complete enclosure Foot switch for hydraulic clamping heads / rear part Tool measurement fixed framesmanually movable fixed frame Ø 20 ~ 200 mm 3-color signal light Tool holderExternal tool holder for lathe, 2 pieces / 2 pieces axial tool holders for driven tools / 2 pieces radial tool holders for driven tools Drill rod holder2 pieces Tool turret2-way disk turret brand Baruffaldi type TBMA200 Hydraulic unitHydraulic unit with motor, pump and hydraulic clamping cylinder hydraulic 3-jaw chuck3 jaws hyd. Chuck Ø 250 mm and set of hard and soft jaws, made by Strong CE version Work area lighting Central lubrication Leveling elements Coolant device  

Year of manufacture: 1999 Type of machine: Semi-automatic The machine is in good condition   Vernet Behringer VP 124 Angle Processing Press For automatic punching, cutting, marking of angles 12 m long feed line on the input and output side Automatic angle loader on the input side   Working area 12,000 mm Size min. 35 x 35 x 4 mm Size max. 150 x 150 x 15 mm Pressing force 490 kN Cutting force max. 1600 kN

Year of manufacture: 2006 Machine type: CNC The machine is in good condition   Portal type plasma and oxy-fuel cutter Compact and stable design Equipped with 2 oxy-fuel cutters and 1 plasma cutter (Kjellberg Hi Focus 130) The software is easy to use Control type MSNC Cutting width is 2000 mm Working area is 2000 x 6000 mm

Year of manufacture: 1992 Machine type: CNC The machine is in good condition   Peddinghaus FDB 600 Plate Processing System Drilling and oxy-fuel cutting Wide range of workpiece sizes Material width from 80 mm to 600 mm Thickness from 6 mm to 50 mm Length up to 6000 mm Drilling system with 3 drill heads Designed for HSS drills With drilling capacity from Ø 8 mm to Ø 40 mm Choice of drill head depends on the desired hole diameter Each drill head operates at different speeds Acetylene is used for oxy-fuel cutting It is possible to change the type of gas On the input side, the machine is equipped with a slanted feeding system with 2x 3000 mm length Siemens CNC control ensures the machine's operation Programming is possible on the machine as well as from the office Loading CAD files in DSTV or DXF format     Number of drill heads 3 pcs Drilling capacity Ø 40 mm Cutting system Oxy-fuel cutting Min. workpiece size 80 x 6 mm Max. workpiece size 600 x 50 x 6000 mm Power 30 kW Weight 6500 kg Dimensions 2000 x 1900 x 2800 mm

Year of manufacture: 2003 Machine type: CNC The machine is in good condition   Kaltenbach KKS400 NA automatic circular saw Universal and compact circular saw with automatic material feeding Circular blade moves from bottom to top Diameter of the circular blade is 400 mm Suitable for cutting flat plates, angles, solid materials, as well as profiles Rotating table for angled cutting The table rotates 180° Angle display on the scale Quickly adjustable angles at 90° and 45° in both directions Stepless hydraulic adjustment of blade feed Adjustable even during cutting Possibility to input 20 programs each up to 10 commands Possible use of circular blades with a thickness from 2.2 to 5 mm Possible use of all possible HSS blades   Cutting capacity: Flat plate 305 x 40 mm Cutting capacity: Angle 120 x 120 mm Cutting capacity: Round Ø 130 mm Diameter of the circular blade 400 mm Cut thickness 2.2 - 5 mm Feed speed 0 - 1000 mm/min Angled cutting +/- 90° Circular blade hole 50 mm Motor power 1.7 / 2.6 kW Weight 1700 kg Dimensions 2650 x 1290 mm

Year of manufacture: 2014 Machine type: CNC The machine is in good condition   Ficep ORIENT 601 DDB drilling system Ficep K 100 Band saw Feeding system on the input side that also measures the workpiece On both input and output sides, there is a 12 m long roller conveyor Drilling head with rotating spindle and tool changer capable of using up to 6 tools Designed for use with HM drills The cone in the spindle is HSK A80 Programming possible from the office or directly on the machine Transfer of CAD files in DSTV or DXF format   Straight 0 ° 310 x 1015 mm Right 45 ° 310 x 610 mm Left 45 ° 310 x 610 mm Saw blade 41 x 1.3 x 7880 mm     Drilling capacity 40 mm No. of drilling heads 1 piece Motor power 17 kW Drilling speed 180 - 5000 rpm Control system Ficep Mitrol  

Used lathe with Siemens 828D and Shopturn, C-axis, and extensive additional equipment.Only 213 spindle hours (since summer 2021)! Additional information about the machine, standard and special equipment on request. Guests also have access to our favorable conditionsfor rental and purchase. Turning diameter600 mm Turning length1380 mm Spindle noseA2-8 ASA Spindle bore91 mm Spindle speeds50-3000 rpm Rapid traverse - longitudinal / flat20/16 m/min Tool turret12 times Tool holder25x25 / ø40 (drill bar holder) mm Rear end quill diameter85 mm Rear end quill adjustment120 mm Quill holder for rear end MK4 MK Spindle motor15 / 18.5 kW Servo motor on X-axis3 kw Servo motor on Z axis3 kw Machine weight approx.7 CNC controlSiemens 828D (Shopturn) C-axis Chip conveyor(chain version) with mobile chip cart Complete enclosure Foot switch for hydraulic clamping heads / rear part Tool measurement fixed framesmanually movable fixed frame Ø 20 ~ 200 mm 3-color signal light Tool holderExternal tool holder for lathe, 2 pieces / 2 pieces axial tool holders for driven tools / 2 pieces radial tool holders for driven tools Drill rod holder2 pieces Tool turret2-way disk turret brand Baruffaldi type TBMA200 Hydraulic unitHydraulic unit with motor, pump and hydraulic clamping cylinder hydraulic 3-jaw chuck3 jaws hyd. Chuck Ø 250 mm and set of hard and soft jaws, made by Strong CE version Work area lighting Central lubrication Leveling elements Coolant device  

Year of manufacture: 1992 Machine type: CNC The machine is in good condition   Peddinghaus FDB 600 Plate Processing System Drilling and oxy-fuel cutting Wide range of workpiece sizes Material width from 80 mm to 600 mm Thickness from 6 mm to 50 mm Length up to 6000 mm Drilling system with 3 drill heads Designed for HSS drills With drilling capacity from Ø 8 mm to Ø 40 mm Choice of drill head depends on the desired hole diameter Each drill head operates at different speeds Acetylene is used for oxy-fuel cutting It is possible to change the type of gas On the input side, the machine is equipped with a slanted feeding system with 2x 3000 mm length Siemens CNC control ensures the machine's operation Programming is possible on the machine as well as from the office Loading CAD files in DSTV or DXF format     Number of drill heads 3 pcs Drilling capacity Ø 40 mm Cutting system Oxy-fuel cutting Min. workpiece size 80 x 6 mm Max. workpiece size 600 x 50 x 6000 mm Power 30 kW Weight 6500 kg Dimensions 2000 x 1900 x 2800 mm

Year of manufacture: 2016 Machine type: NC The machine is in good condition   Kaltenbach KBS 750 DG is a semi-automatic band saw for angle cutting. For cutting I, T, U, … profiles and all types of pipes. Part of the machine is the Kaltenbach T13 conveyor system with a 15.5 m long input feeding system and a 14.5 m long output feeding system. On the input side, a parallel conveyor system (15.75 m) is added, which loads material onto the main conveyors. The same applies to the output side (14.75 m), as well as to the workpiece storage and material retrieval area. Control of the input and output system via the control panel. For measuring workpieces, the Kaltenbach LS 270 stop with NC control is used. Max. length with stop 13,000 mm. The pneumatically controlled stop enables the processing of smaller workpieces. Vertical and horizontal hydraulic clamps secure the workpieces. Laser for cut display Control panel heating     Straight 0 ° 750 x 500 mm Right 70 ° 730 x 500 mm Left 70 ° 710 x 500 mm Right 60 ° 670 x 500 mm Left 60 ° 650 x 500 mm Right 45 ° 550 x 500 mm Left 45 ° 520 x 500 mm Right 35 ° 390 x 500 mm Saw band 41 x 1.3 x 6990 mm Drive power 5.5 kW, 400 V Cutting speed 15 - 100 m/min Feed rate 0 - 300 mm/min Size 3230 x 1160 x 2420 mm Weight 3100 kg

Year of manufacture: 2003 Machine type: CNC The machine is in good condition   Kaltenbach KKS400 NA automatic circular saw Universal and compact circular saw with automatic material feeding Circular blade moves from bottom to top Diameter of the circular blade is 400 mm Suitable for cutting flat plates, angles, solid materials, as well as profiles Rotating table for angled cutting The table rotates 180° Angle display on the scale Quickly adjustable angles at 90° and 45° in both directions Stepless hydraulic adjustment of blade feed Adjustable even during cutting Possibility to input 20 programs each up to 10 commands Possible use of circular blades with a thickness from 2.2 to 5 mm Possible use of all possible HSS blades   Cutting capacity: Flat plate 305 x 40 mm Cutting capacity: Angle 120 x 120 mm Cutting capacity: Round Ø 130 mm Diameter of the circular blade 400 mm Cut thickness 2.2 - 5 mm Feed speed 0 - 1000 mm/min Angled cutting +/- 90° Circular blade hole 50 mm Motor power 1.7 / 2.6 kW Weight 1700 kg Dimensions 2650 x 1290 mm

Year of manufacture: 1997 Machine type: CNC The machine is in good condition   Peddinghaus DSC 300 DRILL drilling system For CNC drilling of steel profiles and pipes Measuring system for length measurement Drilling from 3 different axes each with a drill head designed to clamp HSS drills Suitable for production with limited space Manual tool change Stepless hydraulic feed Automatic drilling Horizontal clamps Marking possible Siemens CNC Control with built-in computer for on-machine programming Length measuring system for the X-axis Measures regardless of the feed system File import in DSTV or DXF format Profile sizes: Flat: from 50 x 10 mm to 300 x 50 mm Angles: from 50 mm to 200 mm I profiles: from 100 to 300 mm Width of workpieces 50 - 300 mm Height of workpieces 300 mm Drilling capacity 8 - 27 mm Power 20 kW Dimensions 2300 x 2500 x 1400 mm Weight 2500 kg  

Year of manufacture: 2014 Machine type: CNC The machine is in good condition   Ficep ORIENT 601 DDB drilling system Ficep K 100 Band saw Feeding system on the input side that also measures the workpiece On both input and output sides, there is a 12 m long roller conveyor Drilling head with rotating spindle and tool changer capable of using up to 6 tools Designed for use with HM drills The cone in the spindle is HSK A80 Programming possible from the office or directly on the machine Transfer of CAD files in DSTV or DXF format   Straight 0 ° 310 x 1015 mm Right 45 ° 310 x 610 mm Left 45 ° 310 x 610 mm Saw blade 41 x 1.3 x 7880 mm     Drilling capacity 40 mm No. of drilling heads 1 piece Motor power 17 kW Drilling speed 180 - 5000 rpm Control system Ficep Mitrol  

Year of manufacture: 1988 Type of machine: CNC The machine is in good condition   Peddinghaus FDB 600 Plate Processing System Drilling and oxy-fuel cutting Wide range of workpiece sizes Material width from 80 mm to 600 mm Thickness from 6 mm to 50 mm Length up to 6000 mm Drilling system with 3 drilling heads Intended for HSS drills With drilling capacity from Ø 8 mm to Ø 40 mm Choice of drilling head depends on the desired hole diameter Each drilling head operates at different speeds Acetylene is used for oxy-fuel cutting It is possible to change the type of gas On the input side, the machine is equipped with a slant feed system with 2x 3000 mm length Siemens CNC control ensures machine operation Loading of CAD files in DSTV or DXF format     Number of drilling heads 3 pieces Drilling capacity Ø 45 mm Cutting system Oxy-fuel cutting min. size of workpiece 80 x 6 mm max. size of workpiece 600 x 50 x 6000 mm Weight 5000 kg Dimensions 2400 x 2000 x 2600 mm

Year of manufacture: 1994 Machine type: CNC The machine is well preserved   Machine for Autogenous Cutting Messer Griesheim Cortina M 4000 3 MG 200 Alfa torches The extraction table and filtering device are integrated Omnicom CNC controller Working width: 4000 mm

Year of manufacture: 1992 Machine type: CNC The machine is in good condition   Peddinghaus DSC300 A is a compact CNC-controlled drilling and sawing machine For cutting and processing steel profiles up to 300 mm in height Equipped with a circular saw for cutting at a 90° angle A measuring system for measuring profile lengths is on the input side 3 drilling heads for drilling from Ø 8 to Ø 27 mm. 1 Vertical, 2 Horizontal A small drilling and sawing machine is particularly useful for an introduction to CNC processing. For construction, machine building, and processing steel profiles It is also suitable for the automotive industry and all other areas. All drilling units operate with stepless hydraulic feed. They have built-in cooling Vertical clamps Circular saw with stepless adjustable hydraulic feed Blade cooling with micro-spray system Siemens control system Built-in computer for programming Programming is possible on the machine or from your computer The measuring system has 2 movable measuring plates The measuring system operates regardless of the feeding, as it measures the actual movement of the workpiece Simple software, with functions for automatic section programming and a pre-entered system of standard profile measurements Graphic display possible And an additional function for optimizing the processing process The length of the workpieces is only limited by the length of your roller conveyor Profile sizes: Flat: from 50 x 10 mm to 300 x 50 mm Angles: from 50 mm to 200 mm I profiles: from 100 to 300 mm   Width of workpieces 300 mm Drilling capacity 8 - 27 mm Cutting speed 32 m/min Feed rate 25 - 300 m/min Max weight of workpieces 3000 kg Diameter of circular saw blade 630 mm Cut width 6 mm Power 25 kW Dimensions 2300 x 2500 x 1400 mm Weight 3300 kg

  Manufacturer: Kaltenbach Year of manufacture: 2003 Machine type: CNC robotic cutting Kuka+Kaltenbach   Kaltenbach KC-1200 flame cutting robot / notching robot is suitable for economical notching of profiles and square tubes. The Kaltenbach KC notching robot is suitable for quick notching of steel beams, H profiles, U profiles, angle profiles, and square tubes. Notching with a CNC-controlled automatic flame cutting system was a beneficial revolution for series production by reducing previously manual notching processing with a hand-held cutting torch. The KC notching robot is in very good condition and can be shown on short notice. The notching system includes a transport system consisting of a roller conveyor system and a measuring pusher clamp system for precise positioning of steel profiles.   The notching robot is equipped with an oxy-acetylene unit for acetylene gas.   The Kaltenbach KC notching robot system consists of a stable machine portal with a Kuka robot mounted on a cross beam. The tested Kuka robot with its moving axes ensures that all release positions can be reached. Seven moving axes ensure precise positioning of profile beams, angle steel, or square tubes. The compact Kuka robot covers six moving axes. The axis mounted on the cross shaft ensures the robot's positioning in the transverse axis. Workpieces move in the X-axis (longitudinal axis) with a solid, sliding measuring cart, which is guided along the rack on the pushing side on the roller conveyor. In this way, even heavy profile beams can be moved and economically notched in connection with a driven roller conveyor. The hydraulic clamping system secures the workpieces during the thermal cutting process. Programming the Kaltenbach KC robot requires good operator skills. CAD data provided by the client or project department is transferred to the system's CUT Manager in DSTV format via the DSTV interface. This can be done via an online connection or through a data medium. This results in a 3D representation of the components. The "Moses" software then generates the necessary robotic data from the DSTV data. The "Moses" software by AUTOCAM Informationstechnik GmbH is an automatic CAD and CAM link to the Kaltenbach KC robot controller for notching in plasma and oxygen cutting processes. Then, with new workpieces, collision checking and robot axis positioning are first verified. This is followed by cutting and finally the removal of finished products with a roller conveyor on the exit side.   Our Nenok service will gladly assist you with the dismantling and assembly of this system.   Number of torches: 1 Workpiece length: 20000 mm Maximum work area (W x H): 1200 x 450 mm Working height: 640 mm Number of axes: 8 Internal work area: 1000 mm Machine weight approx.: 3500 kg Machine dimensions (length x width x height): 2850 x 4400 x 3300 mm  

Year of manufacture: 2003 Machine type: CNC The machine is in good condition   Kaltenbach KC-1200 Autogenous cutting with the help of a robot. For processing profiles and square tubes. Input feed system consisting of a precision feeder and measuring system. Autogenous cutting with Acetylene. The robot has 7 axes, 6 robotic and 1 gantry for moving the entire robot. Transferring CAD files in DSTV format.   Number of burners 1 piece Length of the workpieces 2000 mm Work surface (W x H) 1200 x 450 mm Number of axes 7 Dimensions 2850 x 4400 x 3300 mm Weight 3500 kg

Voortman Plasma Cutter V304 (capable of processing plates up to 3,000 mm x 6,000 mm) Gantry beam 5,000 mm and side carrier X-guide (9,000 mm on both sides of the machine, including double linear guides, screw gear system, and rubber belt) Cutting and depositing table 3,800 mm x 6,240 mm Position 1: Kjellberg SmartFocus400 Plasma Cutting Unit (1 piece, automatic gas console, along with a database of cutting parameters) 3D Plasma Unit (1 piece, including 5 NC axes, Voortman height control, intelligent torch positioning system, and 3D collision sensor for x, y, k, and v weld preparations) Clamping position (1 piece, clamped in position 2, with manual clamping) Silencer (1 piece, including a 1.2L reservoir) Position 2: Autogenous Cutting Torch (1 piece, automatic gas console, ignition, and piercing, along with a database of cutting parameters) Voortman Height Control (1 piece, capacitive height control) Position Compensation (1 piece, servo motor, including laser sensor) Donaldson Smoke Extraction Unit DFPRO12 - 200L - (NEW) Hardware and Software (includes VACAM 'Machine Edition', VACAM 'Office Edition', VACAD editor module, VANEST scheduling software) SigmaNEST PowerPack Automatic Nesting Software Protective Devices (safety bumpers, emergency stop cable) Year 2015 V304 Floor Plan