Measuring range: 200 mm / 6"Reading: 0.01 mm / 0.0005"Deviation: 0.03 mmBridge width: 100 mmSize of the measuring surface: 5.5 mmElectronic digital depth gauge • IP54, DIN 862• standard model for industry and craft• with glass measuring rod for greater precision• water splash resistant IP54 - DIN 40050 / IEC 60529• stainless hardened mechanics• large LCD display with clear reading, digit size 9 mm• stainless hardened design, fixing screw• push button for On/Off• measuring units switchable mm / inches• zeroing at any position• incl. 1x 3 V battery (CR2032)

robust ABS casing large LCD display, 3 digits, clear reading on/off button, Hold function, MIN/MAX button measurement depth approx. 20-40 mm battery status display, display backlight can be turned on storage temperature 0°C-50°C, rel. humidity <80% RH included 9 V battery (6LR61)

Measuring range: 0 - 20 mm / 0 - 0.8 inch Reading: 0.01 mm / 0.0005 inch Deviation: 0.03 mm Possible angles: 60 / 70 / 80 / 90 ° Dimensions: 100 x 62 x 14 mm

Measurement range: 0-100 PSI / 0-7 bar / 0-7 kgf/cm2 / 0-700 kPaReading: 0.1 PSI / 0.01 bar / 0.01 Kgf/cm2 / 1 kPaTolerance: 1%for quick and independent tire pressure measurement in passenger vehicles- robust ABS housing- clear and large numbers, number size 9.5 mm- LCD display with backlight- illuminated connection fitting- on/off button, automatic shutdown- units of measurement can be switched- includes 1x 3V battery (CR2032)

Diameter of the grinding disc: 175 mm Motor: 520 W Number of revolutions: 2950 RPM Electrical connection: 230 V / 50 Hz

Diameter of the grinding disc: 150 mm Motor: 520 W Number of revolutions: 2950 RPM Electrical connection: 230 V / 50 Hz

Abrasive disc diameter: 200 mm Motor: 900 W Electric connection: 400 V / 50 Hz

Length: 175 mm Diameter: 14 mm

Length: 150 mm Diameter: 9 mm

Drill chuck with toothed rimB16 DIN238 mountingincluded key

> For drills from 2.1-15 mm> CBN grinding disc for HSS> Tip angle setting 95°-135°> Grinding of relief angle, cross grinding> Rotations: 4,400 rpm> Motor power 120 W> Connection 230V / 50Hz> Machine dimensions: 32x18x19 cm> Machine weight 10 kgStandard equipment: - CBN grinding disc for HSS - 11 collets 3-13 mmSpecificationsFor drill grinding [mm]: 2.1 - 15Grinding angle [°]: 95° - 135°Grinding disc rotations [rpm]: 4,400Motor power [W]: 120Connection voltage: 230 V / 50 HzMachine weight [kg]: 10DBG - 3 in 1The DBG series drill grinding machine is used for sharpening HSS and carbide drills. The machine has built-in grinding stations for sharpening the tip angle, relief angle, and cross grinding.Depending on the drill material, special diamond grinding discs CBN (for HSS) or SDC (for HM) are used - optional item. 61006.

> Drill sharpening machine, drill grinding machine> For spiral drills from 8 - 32 mm> CBN grinding wheel for HSS> Tip angle adjustment 95°-135°> Relief grinding, cross grinding> Standard equipment for drill sharpener:CBN grinding wheel for HSS23 collet chucks 8-30 mmSpecificationsFor drill grinding [mm]: 8 - 32Grinding angle [°]: 95° - 135°Grinding wheel revolutions [RPM]: 4,400Motor power [W]: 250Power supply voltage: 230 V / 50 HzMachine weight [kg]: 27DBG - 3 in 1The DBG series drill grinding machine is used for grinding drills made of HSS and carbide. The machine has built-in grinding stations for tip angle grinding, relief grinding, and cross grinding.Depending on the drill material, special diamond grinding wheels CBN (for HSS) or SDC (for HM) are used - optional item 61016.

- Drilling capacity in steel: 32 mm - Taper in spindle MK 4 - Overhang: 230 mm - Speed: 80 - 1700 rpm - Spindle stroke: 120 mm

Drilling capacity in steel: 13 mm Taper in quill MK-2 Overhang: 127 mm Revolutions: 500 - 2500 rpm Spindle stroke: 60 mm

Drilling capacity in steel: 16 mm Taper in the spindle MK-2 Overhang: 150 mm Rotations: 340 - 2200 rpm Spindle stroke: 90 mm

Drilling capacity in steel: 16 mm Taper in quill MK-2 Overhang: 195 mm Speed: 100 - 2000 rpm Spindle stroke: 80 mm