High-quality hydraulic pressesOperated by an electric motor as an electro-hydraulic press and manually as a mechanical pressTwo operating speeds, with automatic switch to working speed upon contact with the workpieceAutomatic return of the piston to the upper positionThe working table can be adjusted in height using the pistonLateral movement of the piston for a wider range of operationStandard equipment:Safety overload valvePressure gauge to display pressing forceDirectional control valve for up/down movementChromed piston rodAdjustable height press tableInstructions and CE certificationPressing force (t): 60Piston working speed (mm/s): 8.69 / 2.07Piston return speed (mm/s): 10.79Motor power (kW): 1.5Electrical connection (V/Hz): 400 / 50-60Machine height A (mm): 2,120Machine length without pump B (mm): 1,000Machine width C (mm): 695Width between uprights D (mm): 750Upright width E (mm): 260Maximum internal height F (mm): 947Piston stroke G (mm): 380Machine length with pump H (mm): 1,315Machine weight (kg): 540

High-quality hydraulic presses WPMHManually operated hydraulic pressesIdeal for:- straightening axles, shafts, profiles- pressing or inserting bearings, housings, sleeves, pins,…- form pressing tubes- punching with special knockout plugs- very suitable for load tests, material testing, fuse testing,…Side columns with multiple holes for setting the table to the appropriate heightSome models have a winch for raising the table.The hydraulic cylinder is side adjustable.Pressure force is generated by a manual pump, very precise hydraulic systemAutomatic switch between idle and working speedAutomatic piston returnSafety valve to protect against overloadingManometer displaying pressure forceChromed piston rodV-shaped table insertsSpecificationsPressure force (t): 30Hydraulically powered manual pump: yesFoot pedal pump: yesTwo speeds: yesAutomatic piston return: yesSide adjustable piston: yesMachine height A (mm): 2010Machine length without pump B (mm): 685Machine width C (mm): 643Width between columns D (mm): 565Column width E (mm): 230F-maximum internal height (mm): 1082G-stroke of piston (mm): 160H-length of machine with pump (mm): 836Weight of machine (kg): 165

ADVANTAGESDesktop model, compression capacity up to 15 tonsHydraulic presses with manual operationBending and aligning of axles, shafts, and profilesTube formingPunching with special punchersHighly suitable for stress testing, material testing, and weld joint testingStandard equipment:- Overload safety valve- Pressure gauge on the press- Compression table with locking pin- V-shaped support blocksPressing force (t): 15Manual pump with hydraulic drive: YesTwo-speed drive: YesAutomatic piston return: YesSide adjustable hydraulic piston: YesC-height of machine (mm): 968H-length of machine without pump (mm): 700B-width of machine (mm): 560E-width between columns (mm): 500G-width of columns (mm): 120F-maximum internal height (mm): 457- piston stroke (mm): 160A-length of machine with pump (mm): 790Weight of the machine (kg): 73

ADVANTAGESTower model, compression capacity up to 20 tonsGuide frame with holes and locking pins for adjusting the press tableIndividual models with a winch for manual adjustment of the press table heightHydraulic cylinder can be moved sidewaysPressure with manual pump, very precise hydraulic systemStandard equipment:- Safety valve against overload- Pressure gauge in the press- Chrome-plated cylinder rod- Press table with locking pin- V-shaped support blocksPressing force (t): 20Manual pump with hydraulic drive: YesFoot pedal for pump: YesTwo-speed drive: YesAutomatic return of the piston: YesSide-adjustable hydraulic piston: YesWinch for press table (height adjustment): YesTower model: YesC-machine height (mm): 1,628H-machine length without pump (mm): 730B-machine width (mm): 560E-width between columns (mm): 510G-width of columns (mm): 132F-maximum internal height (mm): 918 -piston stroke (mm): 185A-machine length with pump (mm): 801Machine weight (kg): 113

ADVANTAGESColumn model, compression capacity up to 30 tonsGuide frame with holes and locking pins for setting the press tableIndividual models with a winch for manual adjustment of press table heightThe hydraulic cylinder can move sidewaysPressure with a hand pump, very precise hydraulic systemStandard equipment:- Safety valve against overload- Pressure gauge in the press- Chrome-plated cylinder rod- Pressing table with locking pin- V-shaped support blocksPress force (t): 30Hand pump with hydraulic drive: YesFoot pedal for pump: YesTwo drive speeds: YesAutomatic rod return: YesSide-adjustable hydraulic rod: YesWinch for press table (height adjustment): YesColumn model: YesC-height of the machine (mm): 1,830H-length of the machine without pump (mm): 1,050B-width of the machine (mm): 700E-width between columns (mm): 535G-width of the columns (mm): 140F-maximum internal height (mm): 1031 -stroke length (mm): 150A-length of the machine with pump (mm): 1,050Machine weight (kg): 168

ADVANTAGESHydraulic pump with two-speed pistonSPEED mode for fast piston positioningPOWER mode for slow piston positioning and strong compression up to 50 tonsConvenient and safe foot operation for manual handling of workpieces - ideal for bending and straighteningTwo-part press bed support with support blocksWith a winch for the press table for convenient height adjustmentEquipped with an easy-to-read press gaugeStandard equipment:- Overload protection safety valve- Press pressure gauge- Press table with locking pin- V-shaped support blocksPress force (t): 50Manual pump with hydraulic drive: YesFoot pedal for pump: YesTwo drive speeds: YesAutomatic piston return: YesSide-adjustable hydraulic piston: YesWinch for press table (height adjustment): YesColumn model: YesC-height of the machine (mm): 1,877H-length of the machine without pump (mm): 1,036B-width of the machine (mm): 800E-width between columns (mm): 730G-width of columns (mm): 207F-maximum internal height (mm): 1,048- Stroke of the piston (mm): 200A-length of the machine with pump (mm): 1,328Weight of the machine (kg): 298

Circular Saw VA 370 - Cutting capacity at 0°: Ø 120 mm / 170 x 100 mm - Cutting capacity at 45°: Ø 120 mm / 130 x 100 mm - Saw blade diameter Ø 370 mm - Number of revolutions: 25 / 50 rpm - Blade tilt to the right: 45°

Automatic Band Saw BOMAR ProfiCut 275.230 GANC Maximum cutting diameter: Ø 230 mm / 275 x 180mm Cutting speed: 40 - 80 m/min (Stepless) Saw blade dimensions: 27 x 0.9 x 2720 mm Arc rotation to the right: 45° Arc rotation to the left: 60°

Year of manufacture: 1009 ESAB Machine type: CNC plasma and oxy-fuel cutter Vision 55 Control   ESAB cutting machine model Suprarex SXE-P2 5500 in a gantry design with an oxy-fuel torch and a plasma torch. The cutting surface with an extraction table is 3000 mm x 10,000 mm plus an additional surface as an overhang for possible profile processing. The ESAB cutting machine is sold together with CNC control, including the operating software with a movable control panel, extraction table, rails, and Kjellberg HiFocus 280i plasma cutting unit. Appropriate filtration unit can be purchased separately. The ESAB Suprarex cutting machine is in very good condition.     Cutting width: 3000 mm Number of torches: 2 Cutting length: 10000 mm

Year of manufacture: 2010 Machine type: CNC The machine is in good condition   Drilling system FICEP 1103 DEB. Band saw FICEP SCS 126 for cutting at an angle.   The input feed and measuring system measures the length of profiles and plates. CNC-controlled Band Saw FICEP has an Automatic sorting system which ensures the removal of small pieces.   Straight 0 ° 450 mm 1250 x 450 mm 450 mm Right 45 ° 450 mm 800 x 450 mm 450 mm Left 45 ° 450 mm 800 x 450 mm 450 mm Right 60 ° 450 mm 500 x 450 mm 450 mm Left 60 ° 450 mm 500 x 450 mm 450 mm Saw blade band 67 x 1.6 x 10500 mm Cutting speed 20-100 m/min     The FICEP 1103 DEB drilling system operates in 3 different axes, each equipped with an automatic tool changer. 15 HSK-A63 tool holders are required for the changer. The machine is equipped with HM drills. Integrated chip disposal system. 22 m input conveyor system. 19 m output conveyor system. The machine is equipped with a Mitrol CNC MINOSSE control system. Programming is possible via your computer with the help of MINOSSE software or directly on the machine. Acceptance of CAD files in DSTV or DXF format.     Drilling capacity Ø 40 mm Number of drilling heads 3 pcs Rotational speed 180 - 3000 RPM Feed rate 40 - 800 mm/min Motor power of the drilling system 19 kW Input feeding system 22 m Output feeding system 19 m Max. size of I-profile 1100 x 450 mm Max. size of U-profile 1100 x 300 mm Max size of angles 250 x 250 x 40 mm Max. width of plates 1100 mm  

Year of manufacture: 2014 Machine type: CNC The machine is in good condition   Ficep ORIENT 601 DDB drilling system Ficep K 100 Band saw Feeding system on the input side that also measures the workpiece On both input and output sides, there is a 12 m long roller conveyor Drilling head with rotating spindle and tool changer capable of using up to 6 tools Designed for use with HM drills The cone in the spindle is HSK A80 Programming possible from the office or directly on the machine Transfer of CAD files in DSTV or DXF format   Straight 0 ° 310 x 1015 mm Right 45 ° 310 x 610 mm Left 45 ° 310 x 610 mm Saw blade 41 x 1.3 x 7880 mm     Drilling capacity 40 mm No. of drilling heads 1 piece Motor power 17 kW Drilling speed 180 - 5000 rpm Control system Ficep Mitrol  

Year of manufacture: 199_ Machine type: blasting system Control system: Natus Description for Gietart GW 1500-410 Gietart GW 1500-410 continuous blasting machine Universal for deburring and cleaning steel profiles or steel plates, with 4-jet turbines type C 350 each 7.5 kW, including brush and suction device, including inlet roller conveyor and outlet roller conveyor   Brushing and finishing device: 1 piece Passage width: 1500 mm Passage height: 500 mm Number of turbines: 4 pcs. Power supply: 3 x 400 V Turbine power: 7.5 kW each

Opis za Kaltenbach KBS 620 DG Kaltenbach KBS 620 DG tračna žaga za jeklene konstrukcije, polavtomatska, z nastavkom hitrosti rezanja in hidravličnim pomikom traku žage je brezstopenjsko nastavljiva. Vključno z dovodnim valjčnim transporterjem in izpustnim valjčnim transporterjem ter motoriziranim dolžinskim omejevalnikom L 120 NC z NC krmiljenjem, Teža stroja cca: 2,6 t Moč motorja: 4,0 kW Potreben prostor pribl.: 3,1 x 1,2 x 2,28 m Dolžina žaginega traku: 6175 x 41 x 1,3 mm Območje rezanja pri 45 stopinjah: kvadrat: 430 - 350 mm Razpon rezanja pri 90 stopinjah: kvadrat: 620 - 350 mm Širina reza: 350 mm Hitrost rezanja: 15 - 90 m / min Premer rezanja: 620 mm Pomik žaginega traku: 0 - 300 mm / min  

Year of manufacture: 2004 Machine type: CNC The machine is in good condition Workpiece width: 600 mm Workpiece height: 300 mm Drilling diameter: 10 - 40 mm Number of drilling axes: 3 Saw blade dimensions: 6175 x 41 x 1.3 mm Cutting speed: 15 - 100 m / min   Kaltenbach KBS 620 DG-KD 615 CNC controlled saw and drill combination. This sawing and drilling system consists of a horizontal band saw Kaltenbach KBS 620 DG, drilling system Kaltenbach KD 615, measuring trolley with clamps, and a conveyor system with roller conveyors for material transport. This Kaltenbach sawing and drilling system is ideally suited for economical sawing, drilling, marking, and threading profiles, square tubes, and flat bars in medium-sized steel constructions, steel structures, and steel traders. Kaltenbach KBS 620-KD 615 saw and drilling machine is currently under refurbishment at our factory. Kaltenbach KBS 620 DG-KD 615 machine components   The CNC controlled Kaltenbach saw and drilling system is composed of the following components: Horizontal band saw Kaltenbach KBS 620 DG The Kaltenbach KBS 620 DG horizontal band saw with dual angle cutting capability can be rotated to +60 / -45 degrees. This dual angle cutting system is suitable for sawing steel profiles, square tubes, and flat steel bars. The feeding system positions the workpiece at the exact location under the saw blade, according to the entered length and angle parameters supplied via CNC control. The dimensions of the KBS 620 DG saw blade are 6175 x 41 x 1.3 mm, and you can use various types of saw blades like bimetal M2, bimetal M42, bimetal M51. The cutting speed is infinitely variable in the range of 15 - 100 m/min. Kaltenbach KD 615 drilling system The profile drilling system Kaltenbach KD 615 is equipped with 3 drilling units (one vertical and two horizontal) and a 5-position tool changer for each drilling axis. The maximum workpiece size for the drilling system is 600 x 300 mm, with a minimum size of 50 x 5 mm. The automatic tool changer stores the appropriate drilling tools for drilling with HSS drills with cooling channel in sizes 10 - 40 mm. Highly efficient HSS drills with cooling channels can be sharpened and are mounted with Morse taper adapters. Both drills and saw blades are cooled by air cooling with an oil mist micro-dosing system, increasing efficiency. Kaltenbach KBS 620 DG-KD615 mode of operation After selecting the desired job order, the selected initial material (profiles) is placed on the entry roller conveyor. According to the production order, the profile and processing data are entered into the Kaltenbach CNC control. With the Kaltenbach software, the system can be programmed directly at the machine's control panel or import program files from a CAD system in DSTV format. Once the Kaltenbach sawing and drilling system is programmed with all relevant data, such as material lengths, saw lengths, angle cut settings, drilling positions, drilling diameters, etc., the machine operator must install the appropriate drilling tools into the tool changer. From here, the production process is automated; the worker only needs to remove the first remnant at the alignment cut and then the finished products.   Kaltenbach KBS 620 DG-KD 615 Technical data: Kaltenbach KBS 620 DG horizontal band saw: Cutting area at 45 degrees: flat 430 x 350 mm Cutting area at 60 degrees: square 290 x 350 mm Saw blade dimensions: 6175 x 41 x 1.3 mm Cutting speed 15 - 90 m / min Working feed - 400 mm / min Kaltenbach KD 615 CNC drilling system with 3 drilling axes: Drill spindle speed range 200 - 1000 rpm Drilling spindle drive 3 x 7.5 kW Total drill length. 160-460 mm Drilling feed range 60 - 180 mm / min 5-position tool changer for each drilling axis   Kaltenbach transport system Material transport system consisting of a push measuring trolley for profile lengths up to 12 m. Infeed roller conveyor Outfeed roller conveyor It is possible to shorten or lengthen the roller conveyor for an additional charge.    

  Manufacturer: Kaltenbach Year of manufacture: 2003 Machine type: CNC robotic cutting Kuka+Kaltenbach   Kaltenbach KC-1200 flame cutting robot / notching robot is suitable for economical notching of profiles and square tubes. The Kaltenbach KC notching robot is suitable for quick notching of steel beams, H profiles, U profiles, angle profiles, and square tubes. Notching with a CNC-controlled automatic flame cutting system was a beneficial revolution for series production by reducing previously manual notching processing with a hand-held cutting torch. The KC notching robot is in very good condition and can be shown on short notice. The notching system includes a transport system consisting of a roller conveyor system and a measuring pusher clamp system for precise positioning of steel profiles.   The notching robot is equipped with an oxy-acetylene unit for acetylene gas.   The Kaltenbach KC notching robot system consists of a stable machine portal with a Kuka robot mounted on a cross beam. The tested Kuka robot with its moving axes ensures that all release positions can be reached. Seven moving axes ensure precise positioning of profile beams, angle steel, or square tubes. The compact Kuka robot covers six moving axes. The axis mounted on the cross shaft ensures the robot's positioning in the transverse axis. Workpieces move in the X-axis (longitudinal axis) with a solid, sliding measuring cart, which is guided along the rack on the pushing side on the roller conveyor. In this way, even heavy profile beams can be moved and economically notched in connection with a driven roller conveyor. The hydraulic clamping system secures the workpieces during the thermal cutting process. Programming the Kaltenbach KC robot requires good operator skills. CAD data provided by the client or project department is transferred to the system's CUT Manager in DSTV format via the DSTV interface. This can be done via an online connection or through a data medium. This results in a 3D representation of the components. The "Moses" software then generates the necessary robotic data from the DSTV data. The "Moses" software by AUTOCAM Informationstechnik GmbH is an automatic CAD and CAM link to the Kaltenbach KC robot controller for notching in plasma and oxygen cutting processes. Then, with new workpieces, collision checking and robot axis positioning are first verified. This is followed by cutting and finally the removal of finished products with a roller conveyor on the exit side.   Our Nenok service will gladly assist you with the dismantling and assembly of this system.   Number of torches: 1 Workpiece length: 20000 mm Maximum work area (W x H): 1200 x 450 mm Working height: 640 mm Number of axes: 8 Internal work area: 1000 mm Machine weight approx.: 3500 kg Machine dimensions (length x width x height): 2850 x 4400 x 3300 mm  

Year of manufacture: 2003 Machine type: CNC The machine is in good condition   Kaltenbach KC-1200 Autogenous cutting with the help of a robot. For processing profiles and square tubes. Input feed system consisting of a precision feeder and measuring system. Autogenous cutting with Acetylene. The robot has 7 axes, 6 robotic and 1 gantry for moving the entire robot. Transferring CAD files in DSTV format.   Number of burners 1 piece Length of the workpieces 2000 mm Work surface (W x H) 1200 x 450 mm Number of axes 7 Dimensions 2850 x 4400 x 3300 mm Weight 3500 kg