ELMAG core drilling machines - core drilling with COREMAG are the new high-performance machines in the core drilling sector.Characteristic of these new models are ergonomic handling and state-of-the-art design combined with the latest technical standards.Core drilling capacity in steel: 12-35 mmCore drilling depth: 50 mmSolid drilling in steel D x l: 18×140 mmClamping: Weldon 19Speed range: 650 rpmSpeed levels: 1Stroke: 140 mmMagnet power: 7,500 NMotor power: 1,050 WMains connection: 230 V / 50-60 HzDimensions LxWxH: 390x226x350 mmWeight: 14.5 kgStandard equipment:- safety strap- emulsion tank- handy tool- transport case

ELMAG's COREMAG core drilling machines are new high-performance units in the core drilling sector.These new models are characterized by ergonomic operation and the most modern design, combined with the latest technical standards.Core drilling capacity in steel: 12-75 mmCore drilling depth: 50 mmSolid drilling in steel D x l: 30×200 mmChuck: Weldon 19Speed range: 120/180/320/440 rpmNumber of speed levels: 4Stroke: 170 mmMagnet power: 14,000 NMotor power: 1,600 WPower supply: 230 V / 50-60 HzDimensions LxWxH: 416x227x440 mmWeight: 20 kgstandard equipment:- safety belt- emulsion tank- handy tools- carrying case

ROBUST FOR LARGE DRILL HOLES* Four speed levels for core drilling from Ø 12-100 mm* Thread cutting M4-M30* Solid drilling up to Ø 32 mm* Weldon 19/ Weldon 32 crown chuck* Two rotation directions for drilling and thread cutting* MK3 tool holder* Robust magnetic drill with a 1880 W motor* Suitable threading taps are available* Set in a case with safety chain and toolsTECHNICAL CHARACTERISTICS:* Core drills [mm] Ø 12-100 mm* Max. solid drilling fixG: 16 mm x 110 mm* Solid drilling MK3: 32×150 mm* Magnet dimensions [mm] 215 x 11 mm* Magnet power 17,600 N* Motor - connection power 1880 W* Weight 26 kgNumber of revolutions: idle / loaded1: 90 / 70 min-12: 185 / 145 min-13: 305 / 245 min-14: 605 / 485 min-1Delivered in a case with a core drill holder, safety chain, snap hook, and hex key.

Drilling capacity: 40 mm Threading capacity: M16 Spindle taper: MK 4 Rotation speed: 75 - 960 / 170 - 16000 rpm

Drilling capacity: 45 mm Threading capacity: M20 Taper in spindle: MK 4 Speed: 75 - 1600 / 150 - 3200 rpm

Drilling capacity: 45 mm Tapping capacity: M20 Spindle taper: MK 4 Speed: 75 - 1600 / 150 - 3200 RPM

For clamping cross drills, drill bits with a 19 mm [3/4"] Weldon + Nitto shankMK2 attachment for the drilling machine

Quick-action drill chuck, selected professional quality DIN 239 with a ground internal taper for fixed attachment to the tapered shank.ADVANTAGESEasy manual clamping and unclamping of tools for drilling, countersinking, grindingHigh clamping force without a tightening keySuper-Grip cross knurling for a good gripClamping range: 1-16 mmInternal taper: B16External diameter: 56 mmLength: 95.5 / 109 mmWeight: 1.25 kg

Self-tightening drill chuckfor manual drilling machinesinternal thread 1/2 20 UNFdrill clamping 2-13 mm

Crown drills made of special steel HSS-XE + surface treatment GOLD-TECHSET CONTENTS:Usable length 30 mm,Weldon shank 19 mm (3/4),6 HSS-XE core drills:1 piece each with diameters of 12, 14, 16, 18, 20, 22 mm2 ejector pins 6.34×77 mmFEATURES:Made from highly alloyed special steel HSS-XE. For exceptional hardness at the tooth tips [up to 68 HRC]. Therefore, high wear resistance and long tool life.GOLD-TECH surface treatment: special treatment for longer tool life.Fully ground from the entire material. This fine grinding increases cutting performance while reducing friction. For longer tool life.Only a few manufacturers can produce hardened core drills in stages.For us, this is standard. This achieves exceptionally hard tooth tips [68 HRC] while still maintaining flexible core drills.Seven different cutting geometries, optimized according to the diameter and depth of the core drill cut, ensure maximum cutting performance.APPLICATION:Due to the special surface treatment GOLD-TEC + full grinding + special steel HSS-XE, it is excellent for drilling in steels up to 900 N and also suitable for stainless steels.

Elmag KSBM 3/25 - Feed: 0.056 - 1.8 mm/rev - Drilling capacity in steel: 25 mm - Overhang: 280 mm

STRANDS MODEL S 25 - Stepless speed adjustment - Drilling capacity steel: 25 mm - Overhang: 255 mm - Bench drill press

STRANDS MODEL S 25M - Feed: 0.10 / 0.15 / 0.22 / 0.30 mm/rev - Drilling capacity steel: 25 mm - Overhang: 255 mm - Bench drill press

STRANDS MODEL S 25 B - Drilling capacity in steel: 25 mm - Overhang: 255 mm - Bench drill press

STRANDS MODEL S 25 BM - Feed: 0.10/0.15/0.22/0.30 mm/rev - Drilling capacity in steel: 25 mm - Overhang: 255 mm - Bench drill press