ADVANTAGESColumn model, compression capacity up to 30 tonsGuide frame with holes and locking pins for setting the press tableIndividual models with a winch for manual adjustment of press table heightThe hydraulic cylinder can move sidewaysPressure with a hand pump, very precise hydraulic systemStandard equipment:- Safety valve against overload- Pressure gauge in the press- Chrome-plated cylinder rod- Pressing table with locking pin- V-shaped support blocksPress force (t): 30Hand pump with hydraulic drive: YesFoot pedal for pump: YesTwo drive speeds: YesAutomatic rod return: YesSide-adjustable hydraulic rod: YesWinch for press table (height adjustment): YesColumn model: YesC-height of the machine (mm): 1,830H-length of the machine without pump (mm): 1,050B-width of the machine (mm): 700E-width between columns (mm): 535G-width of the columns (mm): 140F-maximum internal height (mm): 1031 -stroke length (mm): 150A-length of the machine with pump (mm): 1,050Machine weight (kg): 168

ADVANTAGESTower model, compression capacity up to 20 tonsGuide frame with holes and locking pins for adjusting the press tableIndividual models with a winch for manual adjustment of the press table heightHydraulic cylinder can be moved sidewaysPressure with manual pump, very precise hydraulic systemStandard equipment:- Safety valve against overload- Pressure gauge in the press- Chrome-plated cylinder rod- Press table with locking pin- V-shaped support blocksPressing force (t): 20Manual pump with hydraulic drive: YesFoot pedal for pump: YesTwo-speed drive: YesAutomatic return of the piston: YesSide-adjustable hydraulic piston: YesWinch for press table (height adjustment): YesTower model: YesC-machine height (mm): 1,628H-machine length without pump (mm): 730B-machine width (mm): 560E-width between columns (mm): 510G-width of columns (mm): 132F-maximum internal height (mm): 918 -piston stroke (mm): 185A-machine length with pump (mm): 801Machine weight (kg): 113

ADVANTAGESDesktop model, compression capacity up to 15 tonsHydraulic presses with manual operationBending and aligning of axles, shafts, and profilesTube formingPunching with special punchersHighly suitable for stress testing, material testing, and weld joint testingStandard equipment:- Overload safety valve- Pressure gauge on the press- Compression table with locking pin- V-shaped support blocksPressing force (t): 15Manual pump with hydraulic drive: YesTwo-speed drive: YesAutomatic piston return: YesSide adjustable hydraulic piston: YesC-height of machine (mm): 968H-length of machine without pump (mm): 700B-width of machine (mm): 560E-width between columns (mm): 500G-width of columns (mm): 120F-maximum internal height (mm): 457- piston stroke (mm): 160A-length of machine with pump (mm): 790Weight of the machine (kg): 73

ADVANTAGESHydraulic pump with two-speed pistonSPEED mode for fast piston positioningPOWER mode for slow piston positioning and strong compression up to 50 tonsConvenient and safe foot operation for manual handling of workpieces - ideal for bending and straighteningTwo-part press bed support with support blocksWith a winch for the press table for convenient height adjustmentEquipped with an easy-to-read press gaugeStandard equipment:- Overload protection safety valve- Press pressure gauge- Press table with locking pin- V-shaped support blocksPress force (t): 50Manual pump with hydraulic drive: YesFoot pedal for pump: YesTwo drive speeds: YesAutomatic piston return: YesSide-adjustable hydraulic piston: YesWinch for press table (height adjustment): YesColumn model: YesC-height of the machine (mm): 1,877H-length of the machine without pump (mm): 1,036B-width of the machine (mm): 800E-width between columns (mm): 730G-width of columns (mm): 207F-maximum internal height (mm): 1,048- Stroke of the piston (mm): 200A-length of the machine with pump (mm): 1,328Weight of the machine (kg): 298

Pressing force (t): 20A-height of the machine (mm): 1950B-length of the machine without pump (mm): 1560C-width of the machine (mm): 700D-width between the columns (mm): 548E-width of the columns (mm): 100F-maximum internal height (mm): 1021G-piston stroke (mm): 185H-length of the machine with pump (mm): 738Machine weight (kg): 112

High-quality hydraulic pressesOperates with an electric motor as an electro-hydraulic press and manually as a mechanical pressTwo operating speeds, automatic switch to working speed upon contact with the workpieceAutomatic return of the piston to the upper positionThe working table is height-adjustable with the help of the pistonSide shift of the piston for a wider range of operationsStandard equipment:Safety overload valveManometer for displaying pressing forceDirectional control valve for up/downChromed piston rodHeight-adjustable pressing tableInstructions and CEPressing force (t): 160Working piston speed (mm/s): 7.48 / 2.4Return piston speed (mm/s): 9.35Motor power (kW): 3.0Electrical connection (V/Hz): 400 / 50-60A-height of the machine (mm): 2,200B-length of the machine without pump (mm): 1,410C-width of the machine (mm): 825D-width between columns (mm): 1,100E-column width (mm): 380F-maximum internal height (mm): 930G-stroke of the piston (mm): 400H-length of the machine with pump (mm): 1,725Machine weight (kg): 1,195

High-quality hydraulic pressesOperates with an electric motor as an electro-hydraulic press and manual operation as a mechanical pressTwo operating speeds, automatic switch to working speed upon contact with the workpieceAutomatic return of the piston to the top positionThe work table is height-adjustable with the help of a pistonLateral movement of the piston for a wider range of operationStandard equipment:Safety overload valveManometer for displaying pressing forceDirectional valve for up/down directionChromed piston rodAdjustable height press tableManual and CEPressing force (t): 100Working piston speed (mm/s): 7.54 / 2.47Return piston speed (mm/s): 9.06Motor power (kW): 2.2Electric connection (V/Hz): 400 / 50-60A-height of machine (mm): 2,140B-length of machine without pump (mm): 1,350C-width of machine (mm): 755D-width between columns (mm): 755E-width of columns (mm): 300F-maximum internal height (mm): 930G-piston stroke (mm): 380H-length of machine with pump (mm): 1,665Machine weight (kg): 970

High-quality hydraulic pressesOperated by an electric motor as an electro-hydraulic press and manually as a mechanical pressTwo operating speeds, with automatic switch to working speed upon contact with the workpieceAutomatic return of the piston to the upper positionThe working table can be adjusted in height using the pistonLateral movement of the piston for a wider range of operationStandard equipment:Safety overload valvePressure gauge to display pressing forceDirectional control valve for up/down movementChromed piston rodAdjustable height press tableInstructions and CE certificationPressing force (t): 60Piston working speed (mm/s): 8.69 / 2.07Piston return speed (mm/s): 10.79Motor power (kW): 1.5Electrical connection (V/Hz): 400 / 50-60Machine height A (mm): 2,120Machine length without pump B (mm): 1,000Machine width C (mm): 695Width between uprights D (mm): 750Upright width E (mm): 260Maximum internal height F (mm): 947Piston stroke G (mm): 380Machine length with pump H (mm): 1,315Machine weight (kg): 540

High-quality hydraulic pressesOperation with electric motor as electro-hydraulic press and manual operation as mechanical pressTwo operating speeds, automatic switch to working speed upon contact with the workpieceAutomatic piston return to the upper positionThe working table is height adjustable with the help of the pistonStandard equipment:Safety overload valveManometer to display pressing forceDirectional control valve for up/downChrome-plated piston rodHeight-adjustable pressing tableInstructions and CEPressing force (t): 30Working speed of piston (mm/s): 9.8 / 3.57Return speed of piston (mm/s): 18.11Motor power (kW): 1.5Electrical connection (V/Hz): 400 / 50-60A-height of machine (mm): 2,120B-length of machine without pump (mm): 1,000C-width of machine (mm): 695D-width between columns (mm): 750E-width of columns (mm): 260F-maximum internal height (mm): 950G-stroke of piston (mm): 380H-length of machine with pump (mm): 1,315Weight of machine (kg): 385

High-quality hydraulic presses WPMHManually operated hydraulic pressesIdeal for:- straightening of axles, shafts, profiles- pressing in or pressing out of bearings, housings, bushes, pins,…- forming compression of pipes- punch pressing with special knockout plugs- very suitable for load tests, material testing, fuse testing,…Side beams with multiple holes for adjusting the table to the appropriate heightSome models have a winch for lifting the table.The hydraulic cylinder is laterally adjustable.Press force is generated by a manual pump, very precise hydraulic systemAutomatic switch between idle and working speedAutomatic piston returnSafety valve for overload protectionManometer displaying press forceChromed piston shaftV-shaped tabletop insertSpecificationsPress force (t): 50Hydraulically driven manual pump: yesFoot pedal pump: yesTwo speeds: yesAutomatic piston return: yesLaterally adjustable piston: yesA-machine height (mm): 2025B-machine length without pump (mm): 910C-machine width (mm): 764D-width between beams (mm): 750E-width of beams (mm): 300F-inside height max. (mm): 1060G-cylinder stroke (mm): 160H-machine length with pump (mm): 1085Weight of the machine (kg): 340

With foot pedal and hand pumpFine adjustment of pressing forceManually operated hydraulic pressesBending and aligning axles, shafts, and profilesPressing/extruding bearings, bushes, pins, shafts, dowelsForming pipe pressingStamping with special toolsVery suitable for load tests, material tests, and weld testsGuide frame with holes for cross pin to set the height of the press tableThe hydraulic cylinder can be adjusted longitudinallyGeneration of pressing force with hand pump, very precise hydraulic systemManual switching between idle and working speedAutomatic piston return strokeOverload safety valvePressure gaugeChromed piston cylinderTwo-part press table with V-shaped support blocksRobust welded constructionSTANDARD EQUIPMENT- Overload safety valve- Pressure gauge- Chromed piston cylinder- Press table with cross pins- V-shaped support blocks- Operating instructions / CESpecificationsPressing force (t): 15Hydraulic driven hand pump: yesPump foot pedal: yesTwo working speeds: yesAutomatic piston return: yesPiston side adjustable: noSling for table lifting: noA-machine height (mm): 1880B-machine length without pump (mm): 680C-machine width (mm): 600D-width between columns (mm): 560E-column width (mm): 190F-max. internal height (mm): 1.018G-piston stroke (mm): 160H-machine length with pump (mm): 828Machine weight (kg): 117

ADVANTAGESDesktop model, compression capacity up to 15 tonsHydraulic presses with manual operationBending and aligning of axles, shafts, and profilesTube formingPunching with special punchersHighly suitable for stress testing, material testing, and weld joint testingStandard equipment:- Overload safety valve- Pressure gauge on the press- Compression table with locking pin- V-shaped support blocksPressing force (t): 15Manual pump with hydraulic drive: YesTwo-speed drive: YesAutomatic piston return: YesSide adjustable hydraulic piston: YesC-height of machine (mm): 968H-length of machine without pump (mm): 700B-width of machine (mm): 560E-width between columns (mm): 500G-width of columns (mm): 120F-maximum internal height (mm): 457- piston stroke (mm): 160A-length of machine with pump (mm): 790Weight of the machine (kg): 73

ADVANTAGESTower model, compression capacity up to 20 tonsGuide frame with holes and locking pins for adjusting the press tableIndividual models with a winch for manual adjustment of the press table heightHydraulic cylinder can be moved sidewaysPressure with manual pump, very precise hydraulic systemStandard equipment:- Safety valve against overload- Pressure gauge in the press- Chrome-plated cylinder rod- Press table with locking pin- V-shaped support blocksPressing force (t): 20Manual pump with hydraulic drive: YesFoot pedal for pump: YesTwo-speed drive: YesAutomatic return of the piston: YesSide-adjustable hydraulic piston: YesWinch for press table (height adjustment): YesTower model: YesC-machine height (mm): 1,628H-machine length without pump (mm): 730B-machine width (mm): 560E-width between columns (mm): 510G-width of columns (mm): 132F-maximum internal height (mm): 918 -piston stroke (mm): 185A-machine length with pump (mm): 801Machine weight (kg): 113

ADVANTAGESColumn model, compression capacity up to 30 tonsGuide frame with holes and locking pins for setting the press tableIndividual models with a winch for manual adjustment of press table heightThe hydraulic cylinder can move sidewaysPressure with a hand pump, very precise hydraulic systemStandard equipment:- Safety valve against overload- Pressure gauge in the press- Chrome-plated cylinder rod- Pressing table with locking pin- V-shaped support blocksPress force (t): 30Hand pump with hydraulic drive: YesFoot pedal for pump: YesTwo drive speeds: YesAutomatic rod return: YesSide-adjustable hydraulic rod: YesWinch for press table (height adjustment): YesColumn model: YesC-height of the machine (mm): 1,830H-length of the machine without pump (mm): 1,050B-width of the machine (mm): 700E-width between columns (mm): 535G-width of the columns (mm): 140F-maximum internal height (mm): 1031 -stroke length (mm): 150A-length of the machine with pump (mm): 1,050Machine weight (kg): 168

High-quality hydraulic presses WPMHManually operated hydraulic pressesIdeal for:- straightening of axles, shafts, profiles- pressing in or pressing out of bearings, housings, bushes, pins,…- forming compression of pipes- punch pressing with special knockout plugs- very suitable for load tests, material testing, fuse testing,…Side beams with multiple holes for adjusting the table to the appropriate heightSome models have a winch for lifting the table.The hydraulic cylinder is laterally adjustable.Press force is generated by a manual pump, very precise hydraulic systemAutomatic switch between idle and working speedAutomatic piston returnSafety valve for overload protectionManometer displaying press forceChromed piston shaftV-shaped tabletop insertSpecificationsPress force (t): 50Hydraulically driven manual pump: yesFoot pedal pump: yesTwo speeds: yesAutomatic piston return: yesLaterally adjustable piston: yesA-machine height (mm): 2025B-machine length without pump (mm): 910C-machine width (mm): 764D-width between beams (mm): 750E-width of beams (mm): 300F-inside height max. (mm): 1060G-cylinder stroke (mm): 160H-machine length with pump (mm): 1085Weight of the machine (kg): 340

With foot pedal and hand pumpFine adjustment of pressing forceManually operated hydraulic pressesBending and aligning axles, shafts, and profilesPressing/extruding bearings, bushes, pins, shafts, dowelsForming pipe pressingStamping with special toolsVery suitable for load tests, material tests, and weld testsGuide frame with holes for cross pin to set the height of the press tableThe hydraulic cylinder can be adjusted longitudinallyGeneration of pressing force with hand pump, very precise hydraulic systemManual switching between idle and working speedAutomatic piston return strokeOverload safety valvePressure gaugeChromed piston cylinderTwo-part press table with V-shaped support blocksRobust welded constructionSTANDARD EQUIPMENT- Overload safety valve- Pressure gauge- Chromed piston cylinder- Press table with cross pins- V-shaped support blocks- Operating instructions / CESpecificationsPressing force (t): 15Hydraulic driven hand pump: yesPump foot pedal: yesTwo working speeds: yesAutomatic piston return: yesPiston side adjustable: noSling for table lifting: noA-machine height (mm): 1880B-machine length without pump (mm): 680C-machine width (mm): 600D-width between columns (mm): 560E-column width (mm): 190F-max. internal height (mm): 1.018G-piston stroke (mm): 160H-machine length with pump (mm): 828Machine weight (kg): 117

High-quality hydraulic pressesOperation with electric motor as electro-hydraulic press and manual operation as mechanical pressTwo operating speeds, automatic switch to working speed upon contact with the workpieceAutomatic piston return to the upper positionThe working table is height adjustable with the help of the pistonStandard equipment:Safety overload valveManometer to display pressing forceDirectional control valve for up/downChrome-plated piston rodHeight-adjustable pressing tableInstructions and CEPressing force (t): 30Working speed of piston (mm/s): 9.8 / 3.57Return speed of piston (mm/s): 18.11Motor power (kW): 1.5Electrical connection (V/Hz): 400 / 50-60A-height of machine (mm): 2,120B-length of machine without pump (mm): 1,000C-width of machine (mm): 695D-width between columns (mm): 750E-width of columns (mm): 260F-maximum internal height (mm): 950G-stroke of piston (mm): 380H-length of machine with pump (mm): 1,315Weight of machine (kg): 385

High-quality hydraulic pressesOperated by an electric motor as an electro-hydraulic press and manually as a mechanical pressTwo operating speeds, with automatic switch to working speed upon contact with the workpieceAutomatic return of the piston to the upper positionThe working table can be adjusted in height using the pistonLateral movement of the piston for a wider range of operationStandard equipment:Safety overload valvePressure gauge to display pressing forceDirectional control valve for up/down movementChromed piston rodAdjustable height press tableInstructions and CE certificationPressing force (t): 60Piston working speed (mm/s): 8.69 / 2.07Piston return speed (mm/s): 10.79Motor power (kW): 1.5Electrical connection (V/Hz): 400 / 50-60Machine height A (mm): 2,120Machine length without pump B (mm): 1,000Machine width C (mm): 695Width between uprights D (mm): 750Upright width E (mm): 260Maximum internal height F (mm): 947Piston stroke G (mm): 380Machine length with pump H (mm): 1,315Machine weight (kg): 540

High-quality hydraulic pressesOperates with an electric motor as an electro-hydraulic press and manual operation as a mechanical pressTwo operating speeds, automatic switch to working speed upon contact with the workpieceAutomatic return of the piston to the top positionThe work table is height-adjustable with the help of a pistonLateral movement of the piston for a wider range of operationStandard equipment:Safety overload valveManometer for displaying pressing forceDirectional valve for up/down directionChromed piston rodAdjustable height press tableManual and CEPressing force (t): 100Working piston speed (mm/s): 7.54 / 2.47Return piston speed (mm/s): 9.06Motor power (kW): 2.2Electric connection (V/Hz): 400 / 50-60A-height of machine (mm): 2,140B-length of machine without pump (mm): 1,350C-width of machine (mm): 755D-width between columns (mm): 755E-width of columns (mm): 300F-maximum internal height (mm): 930G-piston stroke (mm): 380H-length of machine with pump (mm): 1,665Machine weight (kg): 970

High-quality hydraulic pressesOperates with an electric motor as an electro-hydraulic press and manually as a mechanical pressTwo operating speeds, automatic switch to working speed upon contact with the workpieceAutomatic return of the piston to the upper positionThe working table is height-adjustable with the help of the pistonSide shift of the piston for a wider range of operationsStandard equipment:Safety overload valveManometer for displaying pressing forceDirectional control valve for up/downChromed piston rodHeight-adjustable pressing tableInstructions and CEPressing force (t): 160Working piston speed (mm/s): 7.48 / 2.4Return piston speed (mm/s): 9.35Motor power (kW): 3.0Electrical connection (V/Hz): 400 / 50-60A-height of the machine (mm): 2,200B-length of the machine without pump (mm): 1,410C-width of the machine (mm): 825D-width between columns (mm): 1,100E-column width (mm): 380F-maximum internal height (mm): 930G-stroke of the piston (mm): 400H-length of the machine with pump (mm): 1,725Machine weight (kg): 1,195

Pressing force (t): 20A-height of the machine (mm): 1950B-length of the machine without pump (mm): 1560C-width of the machine (mm): 700D-width between the columns (mm): 548E-width of the columns (mm): 100F-maximum internal height (mm): 1021G-piston stroke (mm): 185H-length of the machine with pump (mm): 738Machine weight (kg): 112

ADVANTAGESHydraulic pump with two-speed pistonSPEED mode for fast piston positioningPOWER mode for slow piston positioning and strong compression up to 50 tonsConvenient and safe foot operation for manual handling of workpieces - ideal for bending and straighteningTwo-part press bed support with support blocksWith a winch for the press table for convenient height adjustmentEquipped with an easy-to-read press gaugeStandard equipment:- Overload protection safety valve- Press pressure gauge- Press table with locking pin- V-shaped support blocksPress force (t): 50Manual pump with hydraulic drive: YesFoot pedal for pump: YesTwo drive speeds: YesAutomatic piston return: YesSide-adjustable hydraulic piston: YesWinch for press table (height adjustment): YesColumn model: YesC-height of the machine (mm): 1,877H-length of the machine without pump (mm): 1,036B-width of the machine (mm): 800E-width between columns (mm): 730G-width of columns (mm): 207F-maximum internal height (mm): 1,048- Stroke of the piston (mm): 200A-length of the machine with pump (mm): 1,328Weight of the machine (kg): 298